HP Color LaserJet 1500L Parts

Apr 25,2013
Part
Description
Color_LaserJet  - HP Color LaserJet 1500L Printer
Fuser_Assembly  - Fuser Assembly (For 220V to 240V operation) - Bonds the toner to the paper with heat
Fuser_Assembly  - Fuser Assembly (For 220V to 240V operation) - Bonds the toner to the paper with heat - Slides in and locks in lower rear of printer
Laser_Scanner  - Laser/scanner assembly
Laser_Scanner  - Laser/scanner assembly
Drum  - Imaging drum/transfer assembly cartridge - Inserts into printer through the top door - Life expectancy is 20,000 pages for black print ONLY, 5,000 pages for color (Typical combined life is approximately 6,000 to 8,000 pages)
Fuser_Assembly  - Fuser Assembly (For 110V to 127V operation) - Bonds the toner to the paper with heat
Drum  - Imaging drum/transfer assembly cartridge - Inserts into printer through the top door - Life expectancy is 20,000 pages for black print only, 5,000 pages for color (Typical combined life is approximately 6,000 to 8,000 pages)
PC_Board  - DC controller board - Mounts on the left side of the printer (Behind the formatter board assembly)
Print_Server  - JetDirect 175X external print server - Has one 4-pin USB connector and one RJ-45 LAN connector - Connects to the printer via the USB port and the network via the LAN port
Power_Supply  - Low voltage power supply - For 110V to 127V AC operation - Includes the AC power input connector and power switch
Cartridge  - Color LaserJet smart Cyan print cartridge - Will print approximately 5,000 pages at 5% coverage
Cartridge  - Color LaserJet smart Yellow print cartridge - Will print approximately 5,000 pages at 5% coverage
Cartridge  - Color LaserJet smart Magenta print cartridge - Will print approximately 5,000 pages at 5% coverage
Power_Supply  - Low voltage power supply - For 220V to 240V AC operation - Includes the AC power input connector and power switch
Carousel  - Carousel (Rotary) assembly - Includes the carousel assembly, the support assembly, end plates, drive gears and shaft, sensors, and cables
Cartridge  - Color LaserJet smart Black print cartridge - Will print approximately 5,000 pages at 5% coverage
Sideplate  - Right side plate assembly - Includes the front half of the metal frame assembly, gears, imaging drum/transfer assembly drive cams, cover engaging mechanism, roller engaging clutch (CL2), and main drive motor (DCM701)
PC_Board  - Formatter board only - Does not include the metal formatter cage covers
Drive_Assembly  - Rotary drive assembly - Includes the carousel rotating motor (DCM703), toner cartridge drive motor (PM705), developing rotary stopper solenoid (SL93), bracket, and gears
Cartridge  - HP Color LaserJet smart Cyan print cartridge - Will print approximately 5,000 pages at 5% coverage
Cartridge  - HP Color LaserJet smart Yellow print cartridge - Will print approximately 5,000 pages at 5% coverage
Cartridge  - HP Color LaserJet smart Magenta print cartridge - Will print approximately 5,000 pages at 5% coverage
Sideplate  - Right rear side plate assembly - Includes the rear half of the metal right side plate, the Fuser Assembly drive motor and the three associated gears
Sideplate  - Right side plate assembly - Includes the front half of the metal frame assembly, gears, imaging drum/transfer assembly drive cams, cover engaging mechanism, roller engaging clutch (CL2), and main drive motor (DCM701) - Mounts on the right side
Power_Supply  - High voltage power supply board (HVT) assembly - Has contacts for the eight high voltage springs in the printer
Cartridge  - HP Color LaserJet smart Black print cartridge - Will print approximately 5,000 pages at 5% coverage
Motor  - Main motor assembly - Large motor mounted on a controller PC board
Motor  - Main motor assembly - Large motor mounted on a controller PC board - Mounts on the inside of the metal right side frame assembly
Power_Supply  - Sub-high voltage board - Small auxillary PC board
Tray  - Multi-purpose front input tray assembly (tray-1) - Includes the front cover piece, pull-out paper support, and the flip-out extender
Cover  - Top cover assembly (blue plastic) - Includes the molded-in face-down output tray and the lift-up top cover door assembly
Motor  - Rotary motor assembly
PC_Board  - Carousel position and toner level photoelectric sensor PC board - 'L' Shaped PC board with the two sensors
Clutch  - Electromagnetic clutch assembly (24V) - Electrical clutch between the clutch drive gear and shaft
PC_Board  - Density photoelectric sensor PC board
Motor  - Stepping motor - 24V DC
Motor  - Stepping motor (24V)
Motor  - Stepping motor - 24VDC
Cable  - Cable assembly (two 3-pin connectors and a spad lug)
Power_Cord  - Power cord (Flint Gray) - 17 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (for 220V in Denmark)
Fan  - Cooling fan (Panaflo Model FBA08T24H - 80mm X 80mm X 15mm high, DC brushless, 24V DC, 190mA)
Roller  - Upper top bin output roller assembly - Includes the shaft with four rubber rollers, two bushing/shaft retainers, two anti-reversing flaps, and the drive gear
Roller  - Lower top bin output roller assembly - Includes the shaft with four rubber rollers, two bushing/shaft retainers, and the drive gear
Sideplate  - Left side carousel plate assembly - End plate under the rotational toner cartridge carousel - Includes all of the high voltage contacts for the toner cartridges
Cover  - Left side cover (Quartz Gray) - Does not include any attaching parts
Solenoid  - Solenoid assembly
PC_Board  - Carousel position and toner level photoelectric sensor PC board - 'L' Shaped PC board with the two sensors
Cable  - Cable assembly (two 3-pin connectors and a spad lug)
Cable  - Universal serial bus (USB) interface cable - Type 'A' connector to type 'B' connector - 2.0m (6.6ft) long
Pressure_Assembly  - Carousel pressure (support) assembly - Includes the main rear support, E-label reader assembly, engaging sensor, and the engaging rod shaft
Pressure_Assembly  - Carousel pressure (support) assembly - Includes the main rear support, E-label reader assembly, engaging sensor, and the engaging rod shaft - Primary support structure for the toner cartridge carousel
Power_Supply  - Sub-high voltage board - Small auxillary PC board
Cover  - Left side cover assembly (Quartz Gray) plastic - Includes the power switch button, rod and spring (The power switch is located on the low voltage power supply board)
Guide  - Lower separation guide assembly - Includes the guide bracket, paper output sensor (PS1) and flag, exit drive shaft with two rubber rollers, shaft gear, and idler gear
Roller  - Paper pickup roller assembly - Includes the shaft, guide assembly cams, the D-shaped roller, and roller retainers - Picks paper from the multipurpose front input tray (tray 1)
Roller  - Registration roller assembly - Includes the roller, bushings, mounting plate, paper sensor, and the sensor flag
Roller  - Transfer roller assembly - Long black foam type roller - Transfers static charge to paper
Cover  - Right side cover assembly (Quartz Gray) plastic - Includes the DIMM memory door
Tray  - Face-up output tray assembly - Includes the pull-down door and Fuser Assembly locking bracket (Does NOT include the lock releases)
Door  - Top cover door (blue plastic) - For accessing the toner cartridges and the imaging drum/transfer assembly - Mounts to the top cover frame
Guide  - Entrance guide assembly - Angled metal guide between the registration roller and the transfer roller
PC_Board  - Top of page photoelectric sensor PC board - Includes the photoelectric top of page sensor and the print engine test switch
Cable  - Cable assembly (two 7-pin connectors)
Door  - Memory access door (Quartz Gray perforated plastic) - Allows access to the printer memory slots - Mounts on the right side cover
Shutter  - Registration shutter assembly - Includes the metal roller, mounting frame, grounding springs, and the dual coupling gear
Control_Panel  - Control panel assembly (mechanical only) - Includes the 'Rotate Carousel', 'Cancel Job' and the 'Go' buttons, plus the various indicator light pipes - All switches and LED's are on the formatter PC board
Cable  - Flat flexible cable (FFC) assembly - Connects between the formatter assembly (J1001) and the DC controller board (J101)
Cable  - Flat flexible cable (FFC) assembly - Connects between the formatter assembly (J1001) and the DC controller board (J101)
Roller  - Paper pickup roller assembly - Includes the shaft, guide assembly cams, the D-shaped roller, and roller retainers - Picks paper from the multipurpose front input tray (tray 1) - Mounts in the lower portion of the front frame assembly
Sideplate  - Left side carousel plate assembly - End plate under the rotational toner cartridge carousel - Includes all of the high voltage contacts for the toner cartridges - Mounts on the metal carousel support frame
Pad  - Separation pad assembly - Includes the separation pad, holder and spring
Guide  - Separation guide assembly - Includes the plastic guide, label, and the two small spring loaded rollers
Guide  - Left paper feed guide (small Black plastic arm)
PC_Board  - Registration sensor PC Board - Small board with flag activated photosensor
Power_Cord  - Power cord (Flint Gray) - 17 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (for 220V in Switzerland)
Reader  - E-label reader (contact board ONLY) - Connects the cartridge nonvoliatile memory to the DC controller board
Guide  - Paper guide assembly - Paper width adjustable guide assembly for the multi-purpose front input tray (tray 1)
Bezel  - Interface bezel (Quartz Gray plastic) - Vertical cover that surronds the interface connectors
Cable  - Flat flexible cable
Plate  - Cover plate (metal)
Connector  - Connector assembly - For optional paper tray
Cable  - Cable assembly (two 4-pin connectors) with shield
Reader  - E-label reader assembly - Connects cartridge nonvoliatile memory to the DC controller board
Clip  - Cable clip - 'C' shaped White plastic
Plate  - Mounting/grounding plate
Cover  - Solenoid cover (Steel) - For magnetic wave sheilding
Bushing  - Bushing/shaft retainer assembly - Black plastic
Gear  - Gear assembly - Metal plate with two White plastic gears attached
Arm  - Top cover rack arm (Black) - Plastic arm with teeth on bottom edge - Disengages the imaging drum/transfer assembly drive cams when the top door is open
Reader  - E-label reader (contact board ONLY) - Connects the cartridge nonvoliatile memory to the DC controller board
Support  - Laser/scanner support assembly (sheet metal plate)
Belt  - Feed guide drive belt - Small belt approximately 5/16 inch wide with 'A' shaped ribs on it
Power_Cord  - Power cord (Dove Gray) - 2.3m (7.5ft) long - Has straight (F) receptacle (For 240V operation in the U.K., Hong Kong, Singapore, Malaysia)
Print_Server  - JetDirect 380X external IEEE-802.11b (Wi-Fi) wireless print server - Connects to printer using Universal Serial Bus (USB) cable
Print_Server  - JetDirect 310X external print server - Fast Ethernet Internet connector for sharing network peripherals with USB ports, in a 10/100 TX LAN environment - Has one USB printer port and one RJ-45 10/100 Base-TX connector
Power_Cord  - Power cord (dove gray) - 2.3M (7.5ft) long - Has straight (F) receptacle (For 240VAC in the United Kingdom, Hong Kong, Singapore, Malaysia)
Tray  - Face-Up output tray door (ONLY)
Tray  - Toner catch tray (curved Black plastic piece) - Holds residual toner from photosensitive drum
Thermistor  - Thermistor for HP Color LaserJet 2820 Series
Reader  - E-label reader assembly - Connects cartridge nonvoliatile memory to the DC controller board
Power_Cord  - Power cord (Flint Gray) - 18 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (for 120V in the USA, Canada, Mexico, Philippines, and Taiwan)
Cover  - Upper rear cover (Quartz Gray) - Mounts on the upper rear of the printer above the face-up output tray door
Airflow_Guide  - Airflow Guide (duct) - Black plastic insert piece which runs the width of the printer and has an air flow hole on right side
Hinge  - Tray hinge - For the left side of the multi-purpose front input tray (Tray 1)
Power_Cord  - Power cord (Flint Gray) - 2.3m (7.5ft) long - Has straight (F) receptacle (For 240V operation in Australia, New Zealand)
Guide  - Right paper feed guide (small Black plastic arm)
Cable  - Cable assembly (two 8-pin connectors, Purple wire)
Cable  - High voltage cable assembly (two 15-pin connectors and two 14-pin connectors)
Solenoid  - Solenoid assembly
Holder  - Holder - Housing for the fusing connector assembly
Cable  - Cable assembly - 'Y' type cable (three connectors) - The 14-pin connector splits into an 8-pin connector and a 6-pin connector
Cable  - Cable assembly (with seven connectors)
Roller  - Paper pickup roller ('D' shaped)
Guide  - Left cartridge guide assembly
Hinge  - Tray hinge - For the right side of the multi-purpose front input tray (Tray 1)
Gear  - Gear assembly - Metal plate with two White plastic gears attached
Connector  - Connector assembly - For optional bottom paper tray
Sensor  - Sensor PC board - Small board with flag activated photosensor
Switch  - Microswitch with lever activator
PC_Board  - Registration sensor PC Board - Small board with flag activated photosensor
Cover  - Front lower cover (blue plastic) - Front lower strip below the multi-purpose input tray - Has recessed area for the printer logo
Cable  - Cable assembly (two 2-pin connectors)
Power_Cord  - Power cord (Flint Gray) - 17 AWG, 2.3m (7.5ft) long - Has straight (F) C13 receptacle (for 220V in Europe, Saudi Arabia, South Africa, India, and Korea)
Airflow_Guide  - Airflow guide (duct) / fan holder bracket assembly (Quartz Gray plastic)
Cover  - Face-down paper output L-Shaped cover ( Blue) - Serves as the rear of the tray for the face-down output tray on top of the printer
Cleaner  - Toner cleaning cloth - Specially treated cloth for absorbing toner (1 per package) - Ideal for cleaning up toner spills
Damper  - Damper assembly (Gray plastic piece with small 13-tooth gear on it)
Connector  - Connector for the Fuser Assembly - Seven small contol pins plus three separated high current pins
Shaft  - Lock release shaft - Small shaft with locking tab - Does NOT include the lock release lever
Cover  - Roller cover - Covers the multipurpose paper pickup roller assembly - Mounts on the lower front of the front frame assembly
Cover  - Front inner cover (Blue) - Mounts on the front frame above the multi-purpose input tray
PC_Board  - Waste toner sensor PC board - Small board with an LED and photoelectric sensor - Monitors the level of the excess toner deposited in the imaging drum/transfer assembly
Cable  - Front cable assembly (six connectors)
Bushing  - Support bushing
Plate  - Transfer slide plate - Small 'U' shaped metal insert plates
Rack_Slide  - Rack slide - White plastic piece with gear teeth layed out in rack form on both sides
Arm  - Top cover rack arm (Black) - Plastic arm with teeth on bottom edge - Disengages the imaging drum/transfer assembly drive cams when the top door is open
Belt  - Paper feed belt - Small black rubber belt approximately 1/8 inch wide with little 'A' shaped ribs on it
Spring  - Right retaining spring - Helps to secure and ground the imaging drum/transfer assembly in the printer
Insulator  - Insulating sheet (Transparent plastic)
Plate  - Feed plate - Center metal plate with slots that the ribs on the middle frame assembly go through
Cable  - High voltage cable assembly
Rod  - Power switch rod - Goes between the power button and the power switch on the low voltage power supply board
Pulley  - Pulley roller (accommodates one feed belt) - Small black roller approximately 1.59cm (5/8 inch) long with one ball type pulley
Gear  - 22 tooth gear (Black plastic) - Small gear with diagonally cut teeth
Spring  - Torsion spring for HP Color LaserJet 2500 Series
Flag  - Sensor arm and flag - Activates the photosensor (Does NOT include the roller)
Bushing  - Right roller bushing - Acts as the bearing and retainer for the right end of the paper pickup roller assembly (tray 1)
Ground  - Grounding plate - Provides grounding for the top-of-page sensor and shielding for the density sensor boards
Lever  - Right side lock release lever
Lever  - Left side lock release lever
Bushing  - Bushing/shaft retainer assembly (White plastic)
Bushing  - Shaft bushing for HP Color LaserJet 1500 Series
Spring  - Tension spring for HP Color LaserJet 1500 Series
Cable  - Cable assembly (8-pin, red wire)
Bushing  - Left roller bushing - Acts as the bearing and retainer for the left end of the paper pickup roller assembly (tray 1)
Cable  - Cable assembly (two 3-pin connectors)
Roller  - Belt roller - Small oval shaped roller approximately 1-3/4 inches long
Insulator  - Insulating sheet (Transparent plastic)
Plate  - Contact plate - copper clad metal spring - Holds the right end of the small 500 Meg-ohm resistor
Cable  - Cable assembly for HP Color LaserJet 1500 Series
Bushing  - Bushing for HP Color LaserJet 1500 Series
Spring  - Tension spring for HP Color LaserJet 1500 Series
Gear  - Dual gear - 26 tooth / 50 tooth (White plastic)
Support  - PC board support (Black plastic holder)
Guide  - Top output bin guide - Small curved ribbed black plastic piece
Spring  - Tray 1 flag spring - Provides torsion for the tray 1 paper sensor flag
Spring  - Left retaining spring - Helps to secure the imaging drum/transfer assembly in the printer
Flag  - Test print flag (Black lever)
Shaft  - Idler gear shaft - Short metal rod
Cable  - Cable assembly (two 5-pin connectors)
Cable  - Cable assembly (two connectors and two spade lugs)
Gear  - 30 tooth gear (White plastic)
Static_Dissipater  - Static eliminator ground plate - Right angled metal piece with small teeth on top edge
Spring  - Electrical contact spring
Cable  - Cable assembly (two 4-pin connectors) with shield - Connects between the cartridge drive motor and the DC controller board
Spring  - Compression spring
Gear  - 30 tooth gear (White plastic)
Gear  - Dual gear - 37 tooth / 43 tooth (White plastic)
Bushing  - Bushing assembly (black plastic bushing with small guide roller on top)
Spring  - Compression spring
Spring  - Electrical contact spring
Plate  - Contact plate - copper clad metal spring - Holds the left end of the small 500 Meg-ohm resistor
Pad  - Light blocking pad assembly - Black plastic frame with soft rubber gasket and stiff conductive Mylar piece (grounded)
Cable  - Cable assembly (four 3-pin connectors)
Cable  - Cable assembly (two 3-pin connectors)
Roller  - Sensor flag roller (small White plastic roller)
Roller  - Pressure roller (small Black hard plastic disk shaped roller)
Roller  - Pressure roller (small Black hard plastic 'solid' roller)
Spring  - Electrical contact spring
Pulley  - Pulley roller (accommodates three feed belts) - Small black roller approximately 3.49cm (1-3/4 inches) long with three ball type pulleys
Ground  - Grounding plate
Gear  - Dual gear - 20 tooth / 40 tooth
Gear  - 26 tooth gear (White plastic) - Has recess for shaft drive pin
Spring  - Electrical contact spring - Spring steel wire with compression springs formed on both ends
Guide  - Cable guide (Quartz Gray plastic)
Gear  - 51 tooth gear (White plastic)
Foot  - Rubber foot - Square self-adhesive rubber foot
Spring  - Torsion spring for HP Color LaserJet 1500 Series
Shield  - RFI shield - Parallel wire form mounted over the fan
Shaft  - Feed drive shaft - Long shaft with eight feed belt ball type pulleys and one ribbed feed guide drive belt pulley
Holder  - Interlock switch holder (Quartz Gray plastic) - Does NOT include the micro-switch
Spring  - Electrical contact spring
Gear  - 16 tooth gear (Black plastic) - Gear with large stop tooth and shaft lock tab
Cover  - Solenoid cover (Steel) - For magnetic wave sheilding - Mounts over the solenoid on the right side of the front frame assembly
Plate  - Contact plate for HP Color LaserJet 2500 Seriess
Spring  - Electrical contact spring
Spring  - Electrical contact spring
Clip  - Drawer connector - Connector located on bottom of tray assembly frame on right side, which connects tray assemblies to each other
Clip  - E-ring clip for HP Color LaserJet 1500 Series
Bushing  - Bushing (black plastic)
Gear  - 15 tooth gear with drive shaft (Black plastic)
Spring  - Electrical contact spring
Holder  - Sensor assembly mounting holder
Gear  - 26 tooth gear (Black plastic) - Has 1/8th portion of gear cut away
Flag  - Paper flag - Plastic rod with paper sensing flag on one end and sensor activator flag on the other
Cover  - Gear Cover (Small Black plastic cover) - Covers the left end of the feed drive shaft
Cover  - Cover - For the engaging motor (PM704) - Mounts on the upper left side of the rear frame assembly
Cable  - Grounding cable assembly
Gear  - Dual gear - 32 tooth / 37 tooth (White plastic)
NamePlate  - Nameplate - Color LaserJet 1500L printer logo
Screw  - Pan head machine screw with washer - M3.0 x 0.5, 6mm long, Number 2 Phillips
Paper  - LaserJet Satin finish tough paper - A size (8.5 x 11-inches) - Will not tear and will withstand outdoor weather conditions - Can print on both sides
Paper  - LaserJet Satin finish tough paper - A4 size (21.0cm x 29.7cm) - Will not tear and will withstand outdoor weather conditions - Can print on both sides - 50 sheets per box
Paper  - Gd: lj paper spec
Power_Cord  - Power cord (Flint Gray) - 16 AWG, 2.3m (7.5ft) long - Has straight (F) C13 receptacle (for 240V in Israel)
Service_Guide_PH  - HP Color LaserJet 1500 printer Service Manual - Includes troubleshooting, error messages, paper jams, parts and parts diagrams.