HP Color LaserJet 1500 Parts
Issue Time:2013-04-25
Part
Description
Color_LaserJet  - HP Color LaserJet 1500 Printer
Fuser_Assembly  - Fuser Assembly (For 220V to 240V operation) - Bonds the toner to the paper with heat
Fuser_Assembly  - Fuser Assembly (For 220V to 240V operation) - Bonds the toner to the paper with heat - Slides in and locks in lower rear of printer
Laser_Scanner  - Laser/scanner assembly
Laser_Scanner  - Laser/scanner assembly
Drum  - Imaging drum/transfer assembly cartridge - Inserts into printer through the top door - Life expectancy is 20,000 pages for black print ONLY, 5,000 pages for color (Typical combined life is approximately 6,000 to 8,000 pages)
Fuser_Assembly  - Fuser Assembly (For 110V to 127V operation) - Bonds the toner to the paper with heat
Power_Supply  - Low voltage power supply - For 110V to 127V AC operation - Includes the AC power input connector and power switch
Drum  - Imaging drum/transfer assembly cartridge - Inserts into printer through the top door - Life expectancy is 20,000 pages for black print only, 5,000 pages for color (Typical combined life is approximately 6,000 to 8,000 pages)
PC_Board  - DC controller board - Mounts on the left side of the printer (Behind the formatter board assembly)
Print_Server  - JetDirect 175X external print server - Has one 4-pin USB connector and one RJ-45 LAN connector - Connects to the printer via the USB port and the network via the LAN port
Power_Supply  - Low voltage power supply - For 110V to 127V AC operation - Includes the AC power input connector and power switch
Cartridge  - Color LaserJet smart Magenta print cartridge - Will print approximately 5,000 pages at 5% coverage
Cartridge  - Color LaserJet smart Cyan print cartridge - Will print approximately 5,000 pages at 5% coverage
Cartridge  - Color LaserJet smart Yellow print cartridge - Will print approximately 5,000 pages at 5% coverage
Power_Supply  - Low voltage power supply - For 220V to 240V AC operation - Includes the AC power input connector and power switch
Carousel  - Carousel (Rotary) assembly - Includes the carousel assembly, the support assembly, end plates, drive gears and shaft, sensors, and cables
PC_Board  - DC controller board
Cartridge  - Color LaserJet smart Black print cartridge - Will print approximately 5,000 pages at 5% coverage
Sideplate  - Right side plate assembly - Includes the front half of the metal frame assembly, gears, imaging drum/transfer assembly drive cams, cover engaging mechanism, roller engaging clutch (CL2), and main drive motor (DCM701)
PC_Board  - Formatter board only - Does not include the metal formatter cage covers
Drive_Assembly  - Rotary drive assembly - Includes the carousel rotating motor (DCM703), toner cartridge drive motor (PM705), developing rotary stopper solenoid (SL93), bracket, and gears
Cartridge  - HP Color LaserJet smart Magenta print cartridge - Will print approximately 5,000 pages at 5% coverage
Cartridge  - HP Color LaserJet smart Yellow print cartridge - Will print approximately 5,000 pages at 5% coverage
Cartridge  - HP Color LaserJet smart Cyan print cartridge - Will print approximately 5,000 pages at 5% coverage
Sideplate  - Right rear side plate assembly - Includes the rear half of the metal right side plate, the Fuser Assembly drive motor and the three associated gears
Sideplate  - Right side plate assembly - Includes the front half of the metal frame assembly, gears, imaging drum/transfer assembly drive cams, cover engaging mechanism, roller engaging clutch (CL2), and main drive motor (DCM701) - Mounts on the right side
Power_Supply  - High voltage power supply board (HVT) assembly - Has contacts for the eight high voltage springs in the printer
Cartridge  - Yield cyan toner
Cartridge  - Yield yellow toner
Cartridge  - Yield magenta toner
Cartridge  - HP Color LaserJet smart Black print cartridge - Will print approximately 5,000 pages at 5% coverage
Cartridge  - Yield black toner
Motor  - Main motor assembly - Large motor mounted on a controller PC board
Tray  - 250 sheet paper tray assembly - Pull out cassette that the paper is loaded into - Does NOT include the paper feed base assembly
Motor  - Main motor assembly - Large motor mounted on a controller PC board - Mounts on the inside of the metal right side frame assembly
Tray  - Tray Assembly : 250 sheet paper tray assembly - Pull out cassette that the paper is loaded into - Does NOT include the paper feed base assembly
Tray  - Multi-purpose front input tray assembly (tray-1) - Includes the front cover piece, pull-out paper support, and the flip-out extender
Power_Supply  - Sub-high voltage board - Small auxillary PC board
Motor  - Rotary motor assembly
Cover  - Top cover assembly (blue plastic) - Includes the molded-in face-down output tray and the lift-up top cover door assembly
Solenoid  - Solenoid assembly
Solenoid  - Solenoid assembly
PC_Board  - Carousel position and toner level photoelectric sensor PC board - 'L' Shaped PC board with the two sensors
Clutch  - Electromagnetic clutch assembly (24V) - Electrical clutch between the clutch drive gear and shaft
Fan  - Cooling fan (Panaflo Model FBA08T24H - 80mm X 80mm X 15mm high, DC brushless, 24V DC, 190mA)
PC_Board  - Density photoelectric sensor PC board
Body  - 250 sheet cassette tray main body assembly - Includes the main structure frame, paper stops, lift plate, springs, and the separation pad assembly - Does NOT include the blue plastic front cover
Motor  - Stepping motor - 24V DC
Motor  - Stepping motor (24V)
Motor  - Stepping motor - 24V DC
Roller  - Paper pickup roller assembly - Includes the 'D' shaped rubber roller on a plastic shaft
Motor  - Stepping motor - 24VDC
Cable  - Cable assembly (two 3-pin connectors and a spad lug)
Power_Cord  - Power cord (Flint Gray) - 17 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (for 220V in Denmark)
Fan  - Cooling fan (Panaflo Model FBA08T24H - 80mm X 80mm X 15mm high, DC brushless, 24V DC, 190mA)
Roller  - Upper top bin output roller assembly - Includes the shaft with four rubber rollers, two bushing/shaft retainers, two anti-reversing flaps, and the drive gear
Roller  - Lower top bin output roller assembly - Includes the shaft with four rubber rollers, two bushing/shaft retainers, and the drive gear
Sideplate  - Left side carousel plate assembly - End plate under the rotational toner cartridge carousel - Includes all of the high voltage contacts for the toner cartridges
Cover  - Left side cover (Quartz Gray) - Does not include any attaching parts
Solenoid  - Solenoid assembly
Solenoid  - Solenoid assembly
Cable  - Cable assembly (two 3-pin connectors and a spad lug)
PC_Board  - Carousel position and toner level photoelectric sensor PC board - 'L' Shaped PC board with the two sensors
Pressure_Assembly  - Carousel pressure (support) assembly - Includes the main rear support, E-label reader assembly, engaging sensor, and the engaging rod shaft - Primary support structure for the toner cartridge carousel
Pressure_Assembly  - Carousel pressure (support) assembly - Includes the main rear support, E-label reader assembly, engaging sensor, and the engaging rod shaft
Cable  - Universal serial bus (USB) interface cable - Type 'A' connector to type 'B' connector - 2.0m (6.6ft) long
Power_Supply  - Sub-high voltage board - Small auxillary PC board
Cover  - Left side cover assembly (Quartz Gray) plastic - Includes the power switch button, rod and spring (The power switch is located on the low voltage power supply board)
Guide  - Lower separation guide assembly - Includes the guide bracket, paper output sensor (PS1) and flag, exit drive shaft with two rubber rollers, shaft gear, and idler gear
Roller  - Paper pickup roller assembly - Includes the shaft, guide assembly cams, the D-shaped roller, and roller retainers - Picks paper from the multipurpose front input tray (tray 1)
Roller  - Registration roller assembly - Includes the roller, bushings, mounting plate, paper sensor, and the sensor flag
Frame  - Center support frame (black plastic) - Support structure for the paper pickup roller, feed roller, and paper sensors
Roller  - Feed roller assembly - Includes the metal shaft and two small rubber rollers - Feeds paper from the paper cassette (or tray three below) into the printer - Mounts on the top of the center frame in the base on the 250-sheet input tray assembly
Roller  - Transfer roller assembly - Long black foam type roller - Transfers static charge to paper
Cover  - Right side cover assembly (Quartz Gray) plastic - Includes the DIMM memory door
Tray  - Face-up output tray assembly - Includes the pull-down door and Fuser Assembly locking bracket (Does NOT include the lock releases)
Clutch  - Electromagnetic clutch assembly (24V) - Electrical clutch between the clutch drive gear and shaft
Cover  - Front cover for the 250 sheet paper cassette tray (Blue) plastic - Has molded in paper loading instructions and a '2' on the front
Door  - Top cover door (blue plastic) - For accessing the toner cartridges and the imaging drum/transfer assembly - Mounts to the top cover frame
Guide  - Entrance guide assembly - Angled metal guide between the registration roller and the transfer roller
PC_Board  - Top of page photoelectric sensor PC board - Includes the photoelectric top of page sensor and the print engine test switch
Cable  - Cable assembly (two 7-pin connectors)
Door  - Memory access door (Quartz Gray perforated plastic) - Allows access to the printer memory slots - Mounts on the right side cover
Shutter  - Registration shutter assembly - Includes the metal roller, mounting frame, grounding springs, and the dual coupling gear
Control_Panel  - Control panel assembly (mechanical only) - Includes the 'Rotate Carousel', 'Cancel Job' and the 'Go' buttons, plus the various indicator light pipes - All switches and LED's are on the formatter PC board
Cable  - Flat flexible cable (FFC) assembly - Connects between the formatter assembly (J1001) and the DC controller board (J101)
Cable  - Flat flexible cable (FFC) assembly - Connects between the formatter assembly (J1001) and the DC controller board (J101)
Support  - Separation pad support - Pivoting 'L' shaped metal support frame (Does NOT include the separation pad assembly)
Roller  - Paper pickup roller assembly - Includes the shaft, guide assembly cams, the D-shaped roller, and roller retainers - Picks paper from the multipurpose front input tray (tray 1) - Mounts in the lower portion of the front frame assembly
Sideplate  - Left side carousel plate assembly - End plate under the rotational toner cartridge carousel - Includes all of the high voltage contacts for the toner cartridges - Mounts on the metal carousel support frame
Pad  - Separation pad assembly - Includes the separation pad, holder and spring
Guide  - Separation guide assembly - Includes the plastic guide, label, and the two small spring loaded rollers
Guide  - Left paper feed guide (small Black plastic arm)
PC_Board  - Registration sensor PC Board - Small board with flag activated photosensor
Cover  - Right side frame/cover assembly (Quartz Gray) plastic - Includes the right side cover and paper tray guide, the cassette retainer spring, tray 3 connector, printer interface connector, and rubber feet
Power_Cord  - Power cord (Flint Gray) - 17 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (for 220V in Switzerland)
Reader  - E-label reader (contact board ONLY) - Connects the cartridge nonvoliatile memory to the DC controller board
PC_Board  - Density photoelectric sensor PC board
Guide  - Paper guide assembly - Paper width adjustable guide assembly for the multi-purpose front input tray (tray 1)
Bezel  - Interface bezel (Quartz Gray plastic) - Vertical cover that surronds the interface connectors
Hinge  - Tray hinge - For the right side of the multi-purpose front input tray (tray one)
Reader  - E-label reader assembly - Connects cartridge nonvoliatile memory to the DC controller board
Cover  - Solenoid cover (Steel) - For magnetic wave sheilding
PC_Board  - Sensor PC board - Small board with flag activated photosensor
Thermistor  - Thermistor for HP Color LaserJet 2500 Series
Reader  - E-label reader (contact board ONLY) - Connects the cartridge nonvoliatile memory to the DC controller board
Connector  - Connector assembly - For optional paper tray
Clip  - Retaining E-ring
Bushing  - Shaft bushing/retainer
Hinge  - Tray hinge - For the left side of the multi-purpose front input tray (tray one)
Cable  - Cable assembly (two 4-pin connectors) with shield
Arm  - Top cover rack arm (Black) - Plastic arm with teeth on bottom edge - Disengages the imaging drum/transfer assembly drive cams when the top door is open
Cross_Brace  - Metal support cross-brace - Mounts on the top rear of the left and right support frame/cover assemblies
Plate  - Mounting/grounding plate
Bushing  - Bushing/shaft retainer assembly - Black plastic
Clip  - Cable clip - 'C' shaped White plastic
Plate  - Cover plate (metal)
Cable  - Flat flexible cable
Gear  - Gear assembly - Metal plate with two White plastic gears attached
PC_Board  - Interconnecting feed drive PC board
Roller  - Feed roller assembly - Includes the metal shaft and two small rubber rollers
Support  - Laser/scanner support assembly (sheet metal plate)
Belt  - Feed guide drive belt - Small belt approximately 5/16 inch wide with 'A' shaped ribs on it
Power_Cord  - Power cord (dove gray) - 2.3M (7.5ft) long - Has straight (F) receptacle (For 240VAC in the United Kingdom, Hong Kong, Singapore, Malaysia)
Print_Server  - JetDirect 380X external IEEE-802.11b (Wi-Fi) wireless print server - Connects to printer using Universal Serial Bus (USB) cable
Power_Cord  - Power cord (Dove Gray) - 2.3m (7.5ft) long - Has straight (F) receptacle (For 240V operation in the U.K., Hong Kong, Singapore, Malaysia)
Print_Server  - JetDirect 310X external print server - Fast Ethernet Internet connector for sharing network peripherals with USB ports, in a 10/100 TX LAN environment - Has one USB printer port and one RJ-45 10/100 Base-TX connector
Tray  - Face-Up output tray door (ONLY)
Tray  - Toner catch tray (curved Black plastic piece) - Holds residual toner from photosensitive drum
Thermistor  - Thermistor for HP Color LaserJet 2820 Series
Reader  - E-label reader assembly - Connects cartridge nonvoliatile memory to the DC controller board