News Group

HP Color LaserJet CM6040f MFP Parts

Issue Time:2012-10-13

Part	Description
Q3938-60132	Scanner - Entire scanner - Does not include power supply, boards, and cable
CE664-69004	Scanner_Assembly - Scanner assembly - Does not include power supply, boards, and cable
Q3938-60161	Scanner_Assembly - Entire scanner - Does not include power supply, boards, and cable
Q3931-67935	Fixing_Assembly - 110-127V FIXING ASS Y Kit Part Number
Q3931-67935	Fixing_Assembly - 110-127V FIXING ASS Y Kit Part Number
Q3931-67914	Fuser_Assembly - Fuser Assembly - For 110 VAC to 127 VAC - Bonds toner to the paper with heat.
Q3931-67915	Fuser_Assembly - Fussing assembly - For 220 VAC to 240 VAC - Bones toner to the paper with heat
Q3938-67901	Carriage - Carriage assembly - Holds and positions print cartridges
Q3931-67927	Fuser_Assembly - Fussing assembly - For 220 VAC to 240 VAC - Bonds toner to the paper with heat
RM1-3244-000CN	Fuser_Assembly - Fuser Assembly - Bonds toner to paper with heat - For 220VAC to 240VAC (+/- 10%) operation
Q3938-67960	PC_Board - Formatter (main logic) board - For HP Color Laserjet CM6040 series
RM1-3307-040CN	Belt - Intermediate transfer belt (ITB) assembly
RM1-3242-000CN	Fuser_Assembly - Fuser Assembly - Bonds toner to paper with heat - For 110VAC to 127VAC (+/- 10%) operation
Q3938-67977	PC_Board - Formatter (main logic) board - For HP Color Laserjet CM6040 series
Q3938-67973	Carriage - Carriage assembly - Holds and positions print cartridges
Q7719-67951	Memory - HP 256MB 100-pin DDR DIMM - Used to add flash memory-based accessory fonts, macros, and patterns
Q7720-67951	Memory - HP 512MB 100-pin DDR DIMM - Used to add flash memory-based accessory fonts, macros, and patterns
RM2-0190-000CN	Power_Supply - Low voltage power supply ass y
RM1-3594-000CN	Power_Supply - Low voltage power supply assembly
RM1-4139-000CN	PC_Board - Main controller PCA assembly - For the stapler/stacker and booklet maker unit
RM1-4178-000CN	Saddle - Saddle stapler assembly
Q3931-67902	Memory - 128MB, 167MHZ, 200-pin DDR DIMM memory module
RM1-4101-000CN	Tray - Stapler/stacker tray - Upper tray assembly for the stapler/stacker (output bin 1)
Q3931-67907	Scanner_Assembly - Laser/scanner assembly kit
CC516-69002	Transport_Module - Intermediate paper transport unit (IPTU) (whole unit)
RM1-4102-000CN	Tray - Upper stack tray assembly (output bin 1) - For the booklet maker unit
CB380-67901	Drum - HP CLJ Blk Print Cartridge
CB386-67901	Drum - Hp color laserjet yellow image drum
CB387-67901	Drum - Hp color laserjet magenta image drum
4G3-0670-000CN	Mount - Motor mount assembly
CB385-67901	Drum - Hp color laserjet cyan image drum
Q3938-67965	Transfer_Kit - Image Transfer Kit 150K
RM1-3307-000CN	Belt - Intermediate transfer belt (ITB) assembly
CB381-67901	Cartridge - Cyan print toner cartridge - For the Color LaserJet CP6015 series
CB382-67901	Cartridge - Yellow print toner cartridge - For the Color LaserJet CP6015 series
CB383-67901	Cartridge - Magenta print toner cartridge - For the Color LaserJet CP6015 series
RM1-6642-000CN	PC_Board - DC controller PC board assembly - Mounts on the rear of the print engine frame on the right side of the formatter board
RM1-6642-040CN	PC_Board - Replacement for part RM1-6642-000CN DC controller PC board assembly - Mounts on the rear of the print engine frame on the right side of the formatter board
RM1-6642-090CN	PC_Board - Assembly-DC Controller PCB R1.84
RM1-6642-080CN	PC_Board - Assembly-DC Controller PCB R1.84
Q3938-67963	Panel - Control panel assembly - Control buttons and display located on top front of printer
Q3938-67910	Power_Supply - Power supply assembly
Q3931-67911	Drive_Assembly - Main drive assembly - Mounts on the right side of the printer - Metal plate with gears attached - Also known as main gear drive assembly
RM1-6642-060CN	DC_Controller - Dc controller pcb ass'y
RM1-6642-050CN	PC_Board - DC controller PC board assembly - Mounts on the rear of the print engine frame on the right side of the formatter board
CB387A	Drum - Hp color laserjet magenta image drum 824a
CB385A	Drum - Hp color laserjet cyan image drum 824a
CB386A	Drum - Hp color laserjet yellow image drum 824a
RM1-4105-000CN	Tray - Lower stack tray assembly (output bin 2) - For the stapler/stacker and booklet maker series
Q3938-67902	PC_Board - Scanner controller-board (SCB) assembly - Provides timing and control for the flatbed scanner
FM2-0721-000CN	Stacker_Assembly - Staple assembly - For stapler/stacker and booklet-maker unit
RM1-4140-000CN	PC_Board - Saddle controller PCA assembly
FL2-0846-000CN	Stacker_Assembly - Stapler unit - Located on the saddle stapler assembly
CB463A	Transfer_Kit - HP Color LaserJet Transfer Kit. CP6015/CM6030/CM6040 TRNFR Kit prints approximately 150, 000 pages
RM1-4395-000CN	Guide - Intermediate upper feed guide assembly
Q3931-67912	Drive_Assembly - Toner cartridge drive assembly - Metal plate with gears attached - Provides movement to the cyan and black cartridges
Q3701-60020	PC_Board - Modem PCA - HP LaserJet analog fax accessory 300
Q3701-60014	Fax_Module - Fax printed circuit assembly (PCA) - Accessed from the rear of the unit - Located on the formatter board
FM2-0722-000CN	Stapler - Stapler sub-assembly - Includes upper and lower clinch guide, staple unit and motor (M14), bin sensor flag, photo interrupter (PI46), and staple mount
RM1-4109-000CN	Feeder - Saddle paper feeder assembly - Includes saddle motor assembly and lower entrance guide assembly - For the booklet maker
RM1-3652-000CN	Reversing_Unit - Reversing assembly for duplexer assembly
Q3931-67913	Drive_Assembly - Toner cartridge drive assembly - Metal plate with gears attached - Provides movement to the yellow and magenta cartridges
CB380A	Drum - Hp color laserjet black print cartridge 823a
RM1-4136-000CN	Feeder - Saddle paper feeder assembly - Includes saddle motor assembly and lower entrance guide assembly - For the stapler/stacker
RM1-3686-000CN	Guide - Intermediate lowerr feed guide assembly
CB384-67901	Cartridge - Black print toner cartridge - For the Color LaserJet CP6015 series
RM1-3333-000CN	Door - Right door sub assembly
RM1-4125-000CN	Tray - Operation-tray assembly - Includes operational tray cable and photo interrupter (TLP1242)
RM1-3293-000CN	Delivery - Face down paper delivery assembly
Q3938-67978	Hard_Drive - Hard drive - High performance EIO serial ATA hard drive
RM1-3665-000CN	Feeder - Duplexing feed assembly
Q3931-67918	Tray - 500-sheet paper input tray cassette - For use with tray 2
Q3938-67961	Hard_Drive - Hard drive - High performance EIO serial ATA hard drive
Q7718-67951	Memory - 128MB, 100-pin, DDR SDRAM DIMM memory module
Q3931-67923	Tray - 500-sheet paper input tray cassette - For use with Tray 3, 4, or 5
Q3931-67919	Roller - Paper pick-up roller and retard roller kit - Includes one pick-up roller, one retard roller, and two paper feed rollers - Use with tray 2,3,4, and 5
Q3931-67938	Roller - Paper pick-up roller - Includes one pick-up roller, and two paper feed rollers - Use with tray 2,3,4, and 5
RM1-3529-000CN	Tray - 1 x 500-sheet input tray cassette
RM1-3218-000CN	Power_Supply - Fuser power supply assembly
RM1-5475-000CN	PC_Board - High voltage transfer \|B\| PCA assembly
RM1-3582-000CN	PC_Board - High voltage transfer \|A\| PCA assembly
RM1-4119-000CN	Cover - Middle height cover assembly for the booklet maker unit
4G3-0671-000CN	Plate - Inner side plate assembly - Used on the booklet market series only
RM1-4408-000CN	Cover - Rear cover assembly - Plastic cover that protects the rear air duct
RM1-3206-000CN	Pickup_Assembly - Paper cassette pick-up assembly - Includes 1 pick roller and 2 feed rollers
RM1-3533-000CN	Pickup_Assembly - 1 x 500-sheet input tray paper pick-up assembly
Q3938-67969	Maintenance_Kit - ADF maintenance kit - Includes the ADF paper pick-up roller assembly and the separation pad assembly
Q3938-67944	Maintenance_Kit - ADF maintenance kit - Includes the ADF paper pick-up roller assembly and the separation pad assembly
RM1-3345-000CN	Pickup_Assembly - Multi-purpose/tray 1 paper pick-up assembly
RM1-3357-000CN	Cover - Front cover assembly - Plastic cover that protects the front door assembly
FM2-0730-000CN	Pressure_Assembly - Pressure roller assembly - For the stapler/stacker and booklet-maker
Q3938-67964	Tray - Duplex switchback tray
RM1-3569-000CN	PC_Board - 1 x 500-sheet input tray paper feed PCA assembly
RM1-4108-000CN	Guide - Swing guide assembly - Includes swing roller assembly, swing jam clearing label, swing press assembly, swing roller shaft assembly, and the paper delivery gate arm
RM1-3585-000CN	PC_Board - Memory tag PCA assembly
RC2-1278-000CN	Cover - Rear cover - Plastic cover that protects the rear part of the stapler/stacker unit
RM1-3222-020CN	Lifter - Lifter-drive-assembly
RM1-4172-000CN	Guide - Entrance upper guide assembly - For the stapler/stacker and booklet maker unit
4G3-0769-000CN	Motor - Ejection stack motor (M32) assembly
RM1-4130-000CN	Delivery - Saddle paper delivery assembly
FM2-0756-000CN	Guide - Saddle guide assembly - Mounts on the front saddle side plate - For the booklet maker
RC1-9871-000CN	Cover - 1 x 500-sheet paper input tray rear cover
RM1-4135-000CN	Guide - Lower height guide assembly
FM2-1409-000CN	Motor - Press motor (M36) assembly
4G1-2283-000CN	Cable - Cable, saddle unit
RM1-4104-000CN	Tray - Stack tray assembly - Includes front and rear extension tray guide, stack tray, and extension tray
RM1-4404-000CN	Cover - Internal front door cover assembly - Plastic cover located behind the front door assembly
RM1-3683-000CN	Cover - Lower left side cover assembly - Located on the intermediate feed main body
RM1-3232-000CN	Case - Thermopile case assembly
4A3-1783-000CN	Roller - Roller, folding
RL1-1477-000CN	Cover - Lower internal cover assembly - Internal cover for the saddle assembly - For the booklet maker unit only
CB459A	Roller - 2nd transfer roller assembly - For the laserjet CP6015 and CM6030/6040 series
RM1-3366-010CN	Drive_Assembly - Drive assembly - For use with multi-purpose/tray 1
RM1-4399-000CN	Guide - Rear guide reader assembly
RM1-3341-000CN	Tray - Multi-purpose/tray 1 drop down door paper input tray assembly
RM1-4121-000CN	Door - Upper cover assembly - Top door located on the stapler/stacker assembly
RM1-4519-000CN	Motor - Fuser DC motor (M11) assembly - Drives the fuser roller, the delivery roller, and the fuser pressure roller
Q3938-67959	Roller - Paper pick-up roller - Includes one pick-up roller, and two paper feed rollers - Use with tray 2,3,4, and 5
RM1-3253-000CN	Cage - Formatter board cage assembly - Metal shield and enclosure for the formatter board
FM2-0737-000CN	Motor - Saddle motor assembly - Includes primary transfer roller disengagement motor(M9) and motor mount
RL1-1210-000CN	Cover - Rear cover - Plastic cover that protects the rear part of the printer
FG3-2887-000CN	PC_Board - Tray driver PCA assembly
RM1-4123-000CN	Cover - Inner cover assembly - Inner cover located on the left side of the finisher main body
RC2-1351-000CN	Cover - Lower internal cover (stapler/stacker only)
Q3931-67905	Cover - Face down cover - Output paper cover on top of the printer - Holds the paper after it has been printed
RM1-4131-000CN	Guide - Upper delivery guide assembly - For the saddle assembly
RM1-3537-000CN	Door - 3 x 500-sheet paper input tray right door assembly
RC1-9336-000CN	Cover - Left cover assembly - Plastic cover that protects the left side of the printer
FG3-2892-000CN	Cable - Cable, solenoid
RM1-4110-000CN	Guide - Lower entrance guide assembly - Located on the saddle paper feeder assembly
RC1-9872-000CN	Cover - 1 x 500-sheet paper input tray left cover
RC1-9351-000CN	Cover - Paper delivery cover
RM1-3247-020CN	Gear - Fuser one way gear assembly
RM1-4129-000CN	Cover - Upper left cover assembly - Plastic cover that protects the upper left side of the booklet maker
RC1-9350-000CN	Cover - Upper front cover - Large rectangle shaped plastic cover located on left side on the top of the printer
RC1-9896-000CN	Caster - Double lock front caster - For the 1 x 500-sheet paper input tray
RC1-9921-000CN	Door - Stock door - For 1 x 500-sheet paper input tray
4G3-0725-000CN	Guide - Motor guide assembly - Located on the saddle assembly - For motor (M3)
Q3931-67920	Roller - Paper pick-up retard roller - Used for tray 1
RM1-4397-000CN	Hardware - Right assist assembly
RM1-3238-000CN	Plate - Cyan partition plate assembly
RM1-4396-000CN	Hardware - Left assist assembly
RM1-3235-000CN	Plate - Yellow partition plate assembly
RC1-9874-000CN	Cover - 1 x 500-sheet paper input tray lower right cover
RM1-3233-000CN	Cover - Left side wall cover assembly
4H3-0370-000CN	Clutch - Electromagnetic shutter clutch (CL31) connector (J1046)
RM1-3564-000CN	Cable - Motor cable - For media feed stepping DC motor (M201)
RL1-1272-000CN	Arm - Auxiliary arm - Mounts on the drive frame on the intermediate paper transfer unit (IPTU)
RM1-3563-000CN	Cable - Motor cable - For media feed stepping DC motor (M202)
RC1-9666-000CN	Cover - Back cover - Located on top of the shield plate on the intermediante feed main body
RM1-3354-000CN	Plate - Rear mount cover plate assembly
RC1-9882-000CN	Stopper - Stopper, right door
RK2-1366-000CN	Motor - Toner feed motor (M17) - Drives the yellow, magenta, and cyan toner feed screws and waste toner feed screws - Mounts on the toner cartridge drive assembly
RM1-3237-000CN	Plate - Magenta partition plate assembly
RM1-3291-000CN	Guide - Multi-purpose/tray 1 guide assembly
RM1-3612-000CN	Cable - Fixing joint cable
4G3-0934-000CN	Sensor - Paper face sensor assembly
RU5-6035-000CN	Guide - Tray roller guide - Located on the output bin 1
RM1-0037-020CN	Roller - Paper feed/seperation roller assembly - Black rubber roller on a blue plastic cylinder
RC2-1283-000CN	Panel - Upper height panel - Located on the stapler/stacker unit
RC1-9695-000CN	Plate - Assist arm cap plate - Located on the upper guide assembly
Q7829-67903	Motor - PCA motor assembly
RL1-1280-000CN	Cover - Right lower cover assembly
RM1-4107-000CN	Sensor - Area sensor flag assembly - Includes flag area sensor plate - Located on the finisher main body
RM1-3618-000CN	Cable - Rear lower cable
RM1-3364-000CN	Fan - Exhaust fan assembly - Cools the fuser area
RM1-3538-000CN	Door - 1 x 500-sheet paper input tray right door assembly
RC1-9917-000CN	Caster - Stationary rear caster - Mounts on the bottom frame of the 500-sheet high capacity input (HCI) paper feeder assembly
FL2-0821-000CN	Solenoid - Solenoid (SL34) - Buffer rear end holding solenoid drive signal
4K1-1103-000CN	Motor - Stepping motor (M5) connector (J113)
4G3-1777-000CN	Cable - Staple connecting cable assembly
FM2-0763-000CN	Sensor - Rear end sensor assembly
FC5-5436-000CN	Rail - Rail rack - Mounts on the finisher main body - Four used
RL1-1311-000CN	Rail - Paper cassette tray left rail
Q7829-67909	Foam - ADF reflector foam - White plastic sheet with foam that reflects the light wile scanning
RM1-3570-000CN	Sensor - Option paper sensor PCA assembly
RM1-3252-000CN	Holder - Main switch (SW11) holder assembly
RC1-8519-000CN	Torque_Limiter - Torque limiter - Located next to paper pick-up retard roller in multi-purpose/tray 1 assembly
XF2-1608-840CN	Belt - Timing belt - Located on the return roller assembly
RC1-9883-000CN	Lever - Lock lever - This is the rear cover lock for the 1 x 500-sheet paper input tray
RM1-3610-000CN	Cable - DC controller board power cable
RM1-3230-000CN	Holder - Transfer contact holder assembly
RC1-9900-000CN	Support - Lock shaft support - Located on the 1 x 500-sheet paper input tray
4S3-2117-000CN	Spring - Tension spring - Provides tension to the front pressure plate (big spring)
4G1-2285-000CN	Cable - Sensor cable - Located on the saddle tray assembly - Connects on the photo interrupter (TLP1242)
RC2-1315-000CN	Caster - Caster - Used on pedestal assembly (universal)
RM1-3340-000CN	Tray - Face down end tray assembly
RL1-1284-000CN	Cover - Top cover assembly - Protects the top part of the main printer chassis
FM2-0720-000CN	Mount - Flexible cable mount assembly
FM2-1708-000CN	Sensor - Option sensor assembly - Includes the photo interrupter (TLP1424) and bracket
RL1-1310-000CN	Rail - Right cassette rail - For the 1 x 500-sheet paper input tray
RM1-4394-000CN	Fan - Chassis fan assembly - Located on the intermediate feed main body - Includes fan and plastic fan bracket (FM8)
RC1-9873-000CN	Cover - 1 x 500-sheet paper input tray upper front cover
4G3-0210-000CN	Lock - Upper cover lock assembly
4S3-0171-000CN	Gear - 50-tooth gear - Located on the saddle assembly
FM2-1417-000CN	Sensor - Sensor/switch assembly - Includes leaf spring, micro switch (MSW31), photo interrupter (PI32), and wire saddle
RK2-1382-000CN	Fan - Delivery unit cooling fan (FM7)
RC2-1284-000CN	Guide - Side wall guide - Mounts on the upper height panel on the booklet maker unit
RM1-3682-000CN	Gear - Damper gear assembly - Includes 70-tooth gear and one way hinge - Located on the damper assembly
RC1-8526-000CN	Guide - Multi-purpose/tray 1 upper guide
RM1-4398-000CN	Guide - Front guide reader assembly
RM1-3620-000CN	Cable - Scanner joint cable
RM1-4411-000CN	Arm - T2 guide arm assembly
Q7829-67917	ADF - ADF float assembly
RM1-3617-000CN	Cable - Front cable
RM1-3619-000CN	Cable - Rear upper cable
XF2-3837-340CN	Belt - Timing belt - Belt that runs on the 30-tooth pulley on the saddle assembly
RC1-9206-000CN	Rail - Rear reverse scanner rail
RM1-3254-000CN	Holder - Cartridge contact holder assembly
Q3938-67952	Hinge - ADF hinge assembly - For the top cover on the scanner (document lid)
RK2-2376-000CN	Sensor - Sensor unit, humidity
RL1-1335-000CN	Guide - Guide, duplexing feed, upper
FM2-0710-000CN	Switch - Approach switch assembly - Includes approach switch plate and microswitch (MS33)
FM2-1423-000CN	Shaft - Swing press shaft assembly
FM2-0707-000CN	Sensor - Paper sensor assembly - Includes the paper sensor arm, photo interrupter (PI42), and paper sensor plate
RC2-1347-000CN	Cover - Slide cover - Plastic cover that slide in to the upper height panel on the stapler/stacker unit
FB3-7928-020CN	Deflector - Paper deflector (flapper 1) - Shaft with curved deflector fingers - Attaches to the front and rear saddle side plate
RC1-9706-000CN	Cover - Right cover assist - Located on the lower guide assembly
RL1-1283-000CN	Guide - Multi-purpose/tray 1 right guide assembly
RM1-3239-000CN	Cover - Right side wall cover assembly
RL1-1322-000CN	Cover - 1 x 500-sheet paper input tray right front cover
RC1-8959-000CN	Guide - Guide, face-down inner
RL1-1321-000CN	Cover - 3 x 500-sheet paper input tray right front cover
RC1-9511-000CN	Cover - Cover, motor
RC1-9278-000CN	Holder - Fuser fan holder - Holds fan (FM2)
RC1-9344-000CN	Cover - Left rear cover - Plastic cover that protects the left rear part of the printer - Corner cover with slot for I/O connectors
RM1-3216-000CN	Holder - Intermediate transfer belt (ITB) gear holder assembly
FC5-3657-000CN	Torque_Limiter - Torque limiter - Torque limiter for the swing press shaft
RK2-1331-000CN	Motor - Stepping motor - Main drive motor for the printer - Motor M1
RM1-4415-000CN	Cover - Rear right cover assembly
FM2-1639-000CN	Mount - Delivery switch mount assembly
RL1-1289-000CN	Roller - Paper pick-up roller - For the 1 x 500-sheet and 3 x 500-sheet paper input tray
RM1-4392-000CN	Roller - Retard roller - Mounts on the multi-purpose roller assembly next to the limiter torque
FB5-2697-000CN	Deflector - Paper deflector (flapper 2) - Shaft with curved deflector fingers - Attaches to the front and rear saddle side plate
RM1-4128-000CN	Mount - Lattice cable mount assembly
RM1-4407-000CN	Guide - Paper delivery guide assembly
RM1-4409-000CN	Cable - Fuser bias cable assembly
4S3-1050-000CN	Bearing - Ball bearing (6902ZZNR)
RK2-1377-000CN	Fan - Cooling fan - Provides air to the print cartridge and imaging drum area
RC1-9705-000CN	Cover - Left cover assist - Located on the lower guide assembly
FM2-0709-000CN	Holder - Area sensor holder assembly
RC2-1280-000CN	Cover - Lower left cover - Mounts on the saddle tray assembly
Q3931-67925	Lock - Security lock adapter kit
RK2-1378-000CN	Fan - Fuser cooling fan (FM2) - Provides air to the fuser area
4G3-0271-000CN	Link - Slide link assembly - Located on the top door assembly (upper cover)
4S3-2116-000CN	Spring - Tension spring - Provides tension to the front pressure plate (small spring)
4G1-1498-000CN	Sensor - Area sensor PCA assembly - Located on the area sensor holder assembly
RC1-9884-000CN	Door - 1 x 500-sheet paper input tray tape door
FG3-2903-000CN	Cable - Cable, operation tray
RK2-1356-000CN	Cable - Flexible flat cable - Connects to the formatter board through the (J9001) connector and to the DC controller PCA through (J123) connector
RM1-3561-000CN	Cable - Intermediate paper transfer unit (IPTU) drawer connector cable assembly - Located on the fin lock assembly
RC1-9881-000CN	Guide - 1 x 500-sheet input tray paper feed roller guide
RM1-3225-000CN	Grip - Front grip support assembly
RM1-3226-000CN	Grip - Rear grip support assembly
RM1-5950-000CN	Cover - Fuser fan cover assembly - Plastic cover located next to the rear cover assembly
FU5-0454-000CN	Gear - 40-tooth gear - Runs on the swing press shaft assembly - Located between torque limiter and bushing on the rear side plate of the finisher
RM1-4401-000CN	Duct - Intermediate transfer belt (ITB) duct assembly
RK2-1370-000CN	Motor - Toner feed motor (M16) - Drives the black toner feed screws and waste toner feed screws - Located on the toner cartridge drive assembly
FC5-4221-000CN	Guide - Tray roller guide - Mounts on the front side tray plate
RL1-1215-000CN	Rail - Right cassette rail - For the 1 x 500-sheet paper input tray
RC1-9276-000CN	Duct - Cartridge duct - Plastic duct that vents air from the fan (FM3) to the cartridge area
RC1-9912-000CN	Shaft - Lock shaft - For the 1 x 500-sheet paper input tray
RC1-9318-000CN	Cable - Guide, cable, e
RC1-9277-000CN	Holder - Cartridge fan holder - Holds fan (FM3)
RM1-3391-000CN	Cable - Face-down unit 2 cable
RM1-4141-000CN	PC_Board - LED PCA assembly - Located on the stapler/stacker unit rear cover
RM1-4402-000CN	Holder - Tag PCA holder assembly
RM1-3599-000CN	Cable - MFP AC cable - Has connector J3005 on one side and J301 on the other
RC1-9309-000CN	Duct - Scanner fan duct - Directs air into scanner area
RL1-1213-000CN	Rail - Left top rail - For the 1 x 500-sheet paper input tray
4A3-1779-000CN	Plate - Rotation plate - Located next to the dowel pin on the saddle assembly
RM1-4391-000CN	Flag - Face down full flag assembly
RL1-1206-000CN	Roller - Pick-up roller - Located on the on the paper pick-up plate assembly
RM1-3571-000CN	Cable - Paper pick-up option drawer cable
RC1-9308-000CN	Cable - Guide, cable, c
RM1-3623-000CN	Cable - Interface joint cable
RC1-9607-000CN	Guide - Hold guide plate - Located on the left side of the lower guide assembly
RC1-9703-000CN	Plate - Rear mount cover plate assembly
FM2-1401-000CN	Sensor - Shutter sensor assembly
4G3-1624-000CN	Sensor - Paper face sensing assembly - Located on the upper height panel
RC1-9915-000CN	Bushing - Bushing - Mounts on the lock shaft next to the arm lock on the 1 x 500-sheet paper input tray
4A3-1955-000CN	Plate - Grounding plate - Used only for booklet maker series
WG8-5696-000CN	Sensor - Photo-interrupter sensor assembly (Does not include the sensor flag)
RM1-4400-000CN	Guide - Guide sensor assembly - For fuser open cover detection sensor (SR34)
FB3-7881-000CN	Knob - Knob - Mounts on the lower internal cover on the left side of the saddle assembly
RM1-3624-000CN	Cable - Color plane registration joint cable
FC5-6978-000CN	Plate - Plate, option tray, front
RC1-8527-000CN	Cover - Multi-purpose/tray 1 blanking cover
RC1-9211-000CN	Cover - Cover, main switch
RM1-3560-000CN	Cable - Drawer cable - Locaten on the fin lock assembly in the intermediate feed main body
RC1-8961-000CN	Duct - Air duct - Deflects air from fan FM7
XF9-0748-000CN	Belt - Timing cogged belt - Located on the front side plate on the finisher main body
RC1-9043-000CN	Door - Band, door
RG5-1928-000CN	Cable - Registration cable assembly - Includes 7P and 3P connectors
RC1-9334-000CN	Duct - Duct, scanner
RK2-1354-000CN	Cable - Laser flexible flat cable - Connects the laser driver PCA through (J501B) connector and the DC controller PCA through (J127) connector
RM1-5953-000CN	Cover - Front internal small cover assembly - Located on the upper right side of the front door assembly
RM1-5030-000CN	Cable - Cable, tp/t2 open sensor
RC1-9649-000CN	Cover - Blanking cover - Located next to the four bushings on the drive frame
RM1-3573-000CN	Cable - Pick-up option PCA connect cable
RM1-3217-000CN	Cable - Fixing motor cable
RM1-3622-000CN	Cable - Panel joint cable
FC5-5004-000CN	Sensor - Paper sensing sensor flag - Mounts on the lower height panel
RC1-9307-000CN	Cable - Guide, cable, b
RC1-8928-000CN	Lever - Paper sensing lever - Senses paper in intermediate transfer belt (ITB) duct assembly
FU5-0457-000CN	Gear - 17-tooth gear - Attaches to the rear tray side plate
RC2-1279-000CN	Cover - Connector tray cover - Mounts on the upper left side of the rear cover on the stapler/stacker unit
VS1-7257-012CN	Connector - Drawer Connector (J1903) - For the 1 x 500-sheet input tray
RC1-8511-000CN	Retainer - Retainer (C Type) for Color LaserJet CP6015n.
FU5-1169-000CN	Bushing - Bushing - Attaches to the rear tray side plate - Located next to the 26-tooth gear on the tray drive shaft assembly
FC5-5024-000CN	Knob - Latch knob - Mounts on the open/close guide on the saddle guide assembly
FS6-0829-000CN	Gear - 16/56-tooth gear - Runs on the folding roller next to the front adjustment arm
RC1-9190-000CN	Plate - Plate, fan fixing, front
RM1-3574-000CN	Cable - Option sensor PCA connect cable
FU5-9059-000CN	Screw - M3 X 6mm machine thread screw with attached washer - Used to secure metal to metal
RM1-3389-000CN	Cable - Control Panel cable
XF2-1607-860CN	Belt - Timing cogged belt - Runs on ejection stack motor assembly (M32)
FM2-0718-000CN	Flag - Entrance sensor flag assembly - Includes the entrance sensor lever and the entrance sensor arm damper
Q7829-67914	Sensor - ADF photo interrupter sensor with connector
RC1-9186-000CN	Guide - Intermediate transfer belt (ITB) rear entrance guide
RC1-9306-000CN	Cable - Guide, cable, a
RC1-9332-000CN	Guide - Fuser cable guide - Located on the fuser power supply assembly
FB3-7934-000CN	Rack_Slide - Rear rack slide - Mounts on the rear saddle side plate
FB3-7967-000CN	Rack_Slide - Front rack slide - Mounts on the front saddle side plate
RM1-3385-000CN	Cable - Toner feed motor (M16) cable
RC1-9246-000CN	Plate - Front sensor plate - For sensor (SR32)
RM1-3576-000CN	Cable - Pick-up option lifter unit cable
5851-2501	Cable - Hard drive power SATA cable - Provides power to the hard drive connects to the mother board
FU5-0435-000CN	Gear - 44-tooth gear - Mounts on the front tray side plate attached to the upper tray cross member
RC1-9312-000CN	Cable - Guide, cable, d
WC2-5512-000CN	Switch - Detection switch
4A3-1763-000CN	Arm - Front adjustment arm - Located on the folding roller on the saddle assembly
4A3-1764-000CN	Arm - Rear adjustment arm - Located on the folding roller on the saddle assembly
FS5-3576-000CN	Gear - 30-tooth gear
RC1-9688-000CN	Guide - Cable guide - Located next to the paper feed cogged belt on the intermediate feed main body
4A3-1782-000CN	Stop - Lever stopper
RU5-0790-000CN	Gear - 83/25-tooth gear - Mounts on the fuser motor plate
RC1-9913-000CN	Arm - Lock arm - For the 1 x 500-sheet paper input tray - Mounts on the lock shaft
FU5-2399-000CN	Gear - 29-tooth gear - Runs on the paper feeder motor assembly
FS5-3577-000CN	Pulley - 39-tooth pulley - Runs on the woodruff roller - Located next to the roller flag
RC1-9326-000CN	Plate - HVT-A (high-voltage transmission) guard plate
RC1-8931-000CN	Rail - Rail, fixing, front
RC1-9360-000CN	Cover - Cover, face-down drive
RC1-9256-000CN	Tray - Screw tray - Attaches next ot the cable guide E
RC2-1356-000CN	Ground - Grounding plate - Located on the rear left side of the saddle assembly
RC2-1734-000CN	LED - LED window - Mounts on the upper left side on the rear cover assembly of the stapler/stacker unit
FS6-0830-000CN	Gear - 16-tooth gear - Runs on the folding roller next to the front adjustment arm
FU5-3086-000CN	Pulley - 20-tooth pulley
RM1-3630-000CN	Cable - Multi-purpose/tray 1 cable
RU5-0868-000CN	Gear - 22-tooth gear - Small gear that runs on the paper-feed cogged belt
FS6-0822-000CN	Gear - 16/33-tooth gear - Runs on the shaft located under the folding roller
RM1-3383-000CN	Cable - Toner feed motor (M17) cable
RC1-9220-000CN	Lever - Lever, door interlock shutter
RC1-9235-000CN	Plate - Plate, drawer guard
RC1-9300-000CN	Button - Button, main switch
RC1-9324-000CN	Holder - Environment sensor holder - Holds the humidity sensor unit
XD9-0234-000CN	Clip - E-Type retainer ring
FB3-7980-000CN	Spring - Torsion spring - Provides torsion to flag sensor located on the rear saddle side plate
FU5-0428-000CN	Gear - 30-tooth gear - Runs on the timing belt on the finisher lower roller next to the 20-tooth pulley
FS6-0815-000CN	Gear - 32-tooth gear/16-tooth pulley - Located on the drive support in front of the motor (M5)
FS6-2582-000CN	Spring - Tension spring - Provides tension to the pressure plate assembly
FS6-0823-000CN	Gear - 16-tooth gear - Runs on the shaft located under the folding roller
FC5-5542-000CN	Guide - Entrance sheet guide - Mounts on the cross member entrance guide
FB3-7925-030CN	Flag - Roller flag - Mounts next to the 39-tooth pulley on the saddle assembly
FB3-7973-000CN	Holder - Roller holder 2 - For the cam shaft
RM1-3575-000CN	Cable - Paper pick-up option cable - Used for the 1 x 500-sheet input tray
XA9-1495-000CN	Screw - Wafer head machine screw - M3, 6mm long, No. 2 Phillips recess - Secures metal to sheet metal
XA9-0912-000CN	Screw - Machine screw with captured washer - M5 X 12 - Typically used to secure plastic parts to metal
XA9-1386-000CN	Screw - M3 X 8mm long self threading screw with captured washer
XA9-1422-000CN	Screw - M4 X 12mm machine screw with washer
XA9-1448-000CN	Screw - Screw - M4 X 8mm long
XA9-1449-000CN	Screw - M3 pan-head Phillips screw with machine threads - 8mm long
XA9-1469-000CN	Hardware - Machine screw with attached washer - M3, 10mm - Used to hold plastic to metal
FC5-5021-000CN	Latch - Right latch claw
RC1-9687-000CN	Hardware - Blanking sheet - Mounts on the shield plate
XA9-1500-000CN	Screw - M3 pan-head Phillips screw with flat washer - 8mm long
XD2-3100-152CN	Ring - C-type external retainer ring
XD3-2300-142CN	Pin - Dowel pin - Located next to the 17-tooth gear on the output bin 2
XD3-2300-202CN	Pin - Dowel pin - Locate next to the 50-tooth gear
RC1-9244-000CN	Spring - Torsion spring - Provides torsion to the front fuser fan plate
RC1-9231-000CN	Rail - Roller, rail
RC1-9233-000CN	Spring - Spring, leaf
RC1-8939-000CN	Rail - Rail, fixing, rear
RC1-9208-000CN	Foot - Chassis rubber foot
RC1-9901-000CN	Plate - Switch cover plate - For the 1 x 500-sheet paper input tray door open detection switch (SW103)
RC1-9328-000CN	Holder - High voltage connector holder - Located on the left side of the printer chassis - Attaches behind the main switch cover
RM1-3572-000CN	Cable - Pick-up option door switch cable
FB3-7979-000CN	Flag - Flag sensor - Located on the rear saddle side plate
FB5-5937-020CN	Flag - Flag sensor - Located next to the ball bearing (6902ZZNR) - Mounts on the rear saddle side plate
FC5-5005-000CN	Spring - Torsion spring - Provides torsion to the paper sensing sensor flag located on the lower height panel
4A3-4715-000CN	Plate - Stop hinge plate - Used only for booklet maker series
RM1-5029-000CN	Cable - Cable, fixing open sensor
XB4-7401-005CN	Screw - M4 truss head (flanged) screw - 10mm long - Typically used to secure plastic parts to the left and right side plates
XB4-7401-006CN	Screw - M4x10 tapping pan-head screw
XB6-7303-005CN	Screw - Machine screw - M3, 30mm long with self-tapping threads - Typically used to hold metal to plastic
WT2-5694-000CN	Clamp - Snap-in cable clamp
WT2-5738-000CN	Holder - Cable holder - Secures cable at left front side near DC controller board - White plastic stand-off/holder
RU5-0791-000CN	Gear - 34-tooth gear - Mounts on the fuser motor plate
RU5-2796-000CN	Spring - Tension spring - Provides tension to the paper sensing lever
RU5-2822-000CN	Spring - Tension spring - Provides tension to the scanner assembly
VS1-7177-003CN	Clip - Retaining clip - This is a retaining clip for fuser thermistor power cable
XA9-1504-000CN	Screw - M3 truss head (flanged) screw - 8mm long
XA9-1801-000CN	Screw - M13x12 RS screw - Used to secure metal to metal
XB1-2300-407CN	Screw - M3x4 machined truss-head screw
XD9-0240-000CN	Pin - Pin, dowel
RL1-1216-000CN	Plate - Fuser motor (M11) plate
RS5-9099-000CN	Screw - Stepped screw - Larger shoulder screw used to fasten the left side cover to the frame of the 2,000-sheet paper feeder assembly (two used)
FS6-0814-000CN	Gear - 16-tooth gear/32-tooth pulley - Located on the rear part of the lower pass guide next to the 32-tooth gear/16-tooth pulley
RC1-9620-000CN	Pulley - Flange pulley - Attaches to the paper feed cogged belt located on the intermediate feed main body assembly
RC1-4585-000CN	Bushing - Bushing - Located on the side cover assembly (four needed)
RC1-8567-000CN	Roller - Multi-purpose paper pick-up roller
Q7829-67924	Roller - Pickup roller high capacity input (HCI) - Attached to the pickup arm - Presses down the paper stack surface to feed the paper one sheet at a time (white)
Q3938-67970	Cover - ADF jam access cover - Located on the left top side of the printer - To remove paper jam from the ADF
Q6998-67901	Door - Front door assembly - For the stapler/stacker unit
Q6998-67902	Tray - Top output bin tray - Stack sub-tray assembly for the stapler/stacker unit
Q6999-67901	Door - Front door assembly - For the booklet maker unit
Q7542-60003	PC_Board - Formatter (main logic) board - For HP Color Laserjet CM6040 series
Q3938-60107	Overlay - Control panel overlay - Snaps on top of the control panel assembly (English)
Q3938-67953	Diverter - ADF diverter assembly - Diverts paper to duplexer assembly, face up tray or face down delivery assembly
Q3938-67954	Cover - Roller cover - Plastic cover that protects the ADF pick-up roller
RM1-4113-000CN	Tray - Booklet-output bin (saddle tray assembly) - Includes sensor cable and photo interrupter (TLP1242)
Q3931-67906	Filter - Air filter kit
Q3938-67945	Cover - ADF rear end cover assembly - End cover (cap)
Q3938-67946	Cover - ADF front end cover assembly - End cover (cap)
Q3938-67948	Cable - ADF cable assembly - Interconnects the ADF assembly to the flatbed scanner assembly
Q3938-67949	Pad - ADF separation pad assembly - Helps separate paper in the ADF
Q3938-67950	Tray - ADF input paper tray assembly - Holds 50-sheets
Q3938-67951	Flag - ADF paper sensor flag
Q3938-67905	Inverter - Inverter assembly
Q3938-67906	Glass - Scanner glass assembly - Glass plate on which the documents are placed to be scanned - Mounts in the scanner bezel
Q3938-67907	Sensor - Scanner lid sensor assembly
Q3938-67908	Motor - Scanner motor - Drives the optical carriage assembly
Q3938-67909	Pulley - Scanner pulley assembly - For transmission timing belt
Q3938-67911	Rod - Scanner rod - Shaft that the scanner carriage assembly rides on
Q3938-67915	Guide - Rubber guide - For the scanner glass
Q3938-67920	Cover - Upper cover - Plastic cover that protects the upper left side of the ADF unit
Q3938-67921	Cover - ADF lower cover - Plastic cover that protects the lower left part of the ADF unit
Q3938-67922	Cover - Upper cover - Plastic cover that protects the upper right side of the ADF unit
Q3938-67923	Cover - ADF lower cover - Plastic cover that protects the lower right part of the ADF unit
Q3938-67924	Cover - ADF top cover - Plastic cover that protects the top part of the ADF unit
Q3938-67925	Cover - ADF rear cover - Plastic cover that protects the rear part of the ADF unit
Q3938-67926	Cover - Front cover - Plastic L-shaped cover were control panel snaps on
Q3938-67927	Cover - Plastic screw covers with an adhesive back - Covers screw heads that secure the plastic scanner top cover
Q3938-67928	Hardware - Power supply harness
Q3938-67935	Belt - Transmission timing belt - Maintain constant speed during power transmission - Located on the trasmission assembly
Q3938-67937	Fan - Cooling fan - Fan that cools the scanner controller board (SCB) area

Previous HP Color LaserJet CM6049f MFP Parts

Next HP Color LaserJet CM6030 MFP Parts

Company Profile

4 3 2 1

Slon is a R & D and manufacturing printer accessories and supplies Health providers, having the best technical staff and R & D strength. Slon is committed to provide users with perfect printing supplies,hp laser printer parts,hp printer repair, hp printer service. Barcode scanner usb,Copier parts,Copier repair parts,Label printer parts SLon Wumart is committed to provide customers with products and prices and sincere hospitality services, and more business development in the new areas to strengthen the Group in Hong Kong, Mainland China and overseas to be the industry leader. Looking to the future, the Company's members will continue to enhance management standards, satisfactory returns for investors, and to embrace the opportunities and challenges! Deeply thank all the people who support and concern SLon development!

qr-code

connect with us