News Group

HP Color LaserJet CP6015dn Parts

Issue Time:2012-08-31

Click Part Number to view item detail and ordering information.

Part	Description
Q7539-69001	PC_Board - Formatter (Main logic) board - For HP Color Laserjet CP6015 series
Q7539-69003	PC_Board - Formatter (main logic) board - For HP Color Laserjet CP6015 series
Q7539-69002	PC_Board - Formatter (Main logic) board - For HP Color Laserjet CP6015 series
Q3931-67935	Fixing_Assembly - 110-127V FIXING ASS Y Kit Part Number
Q3931-67935	Fixing_Assembly - 110-127V FIXING ASS Y Kit Part Number
Q3931-67914	Fuser_Assembly - Fuser Assembly - For 110 VAC to 127 VAC - Bonds toner to the paper with heat.
Q3931-67915	Fuser_Assembly - Fussing assembly - For 220 VAC to 240 VAC - Bones toner to the paper with heat
Q3931-67927	Fuser_Assembly - Fussing assembly - For 220 VAC to 240 VAC - Bonds toner to the paper with heat
Q3931-67904	Memory - 512MB, 167MHZ, 200-pin DDR DIMM memory module
RM1-3307-040CN	Belt - Intermediate transfer belt (ITB) assembly
RM2-0190-000CN	Power_Supply - LOW VOLTAGE POWER SUPPLY ASS Y
RM1-3594-000CN	Power_Supply - Low voltage power supply assembly
RM1-4139-000CN	PC_Board - Main controller PCA assembly - For the stapler/stacker and booklet maker unit
RM1-4178-000CN	Saddle - Saddle stapler assembly
Q3931-67902	Memory - 128MB, 167MHZ, 200-pin DDR DIMM memory module
RM1-4101-000CN	Tray - Stapler/stacker tray - Upper tray assembly for the stapler/stacker (output bin 1)
Q3931-67907	Scanner_Assembly - Laser/scanner assembly kit
RM1-4102-000CN	Tray - Upper stack tray assembly (output bin 1) - For the booklet maker unit
CB380-67901	Drum - HP CLJ Blk Print Cartridge
CB386-67901	Drum - HP COLOR LASERJET YELLOW IMAGE DRUM
CB387-67901	Drum - HP COLOR LASERJET MAGENTA IMAGE DRUM
4G3-0670-000CN	Mount - MOTOR MOUNT ASSEMBLY
CB385-67901	Drum - HP COLOR LASERJET CYAN IMAGE DRUM
Q3938-67965	Transfer_Kit - Image Transfer Kit 150K
RM1-3307-000CN	Belt - Intermediate transfer belt (ITB) assembly
CB381-67901	Cartridge - Cyan print toner cartridge - For the Color LaserJet CP6015 series
CB382-67901	Cartridge - Yellow print toner cartridge - For the Color LaserJet CP6015 series
CB383-67901	Cartridge - Magenta print toner cartridge - For the Color LaserJet CP6015 series
RM1-3581-050CN	PC_Board - DC Controller PCB
RM1-3581-000CN	PC_Board - DC CONTROLLER PCB ASSY
Q3931-67937	PC_Board - KIT-DC CONT. W/SERVICE DOC 1.61
Q3931-67928	PC_Board - DC controller PC board assembly KIT-DC CONT. W/SERVICE DOC 1.61
Q3931-67911	Drive_Assembly - Main drive assembly - Mounts on the right side of the printer - Metal plate with gears attached - Also known as main gear drive assembly
CB387A	Drum - HP COLOR LASERJET MAGENTA IMAGE DRUM 824A
CB385A	Drum - HP COLOR LASERJET CYAN IMAGE DRUM 824A
CB386A	Drum - HP COLOR LASERJET YELLOW IMAGE DRUM 824A
RM1-4105-000CN	Tray - Lower stack tray assembly (output bin 2) - For the stapler/stacker and booklet maker series
FM2-0721-000CN	Stacker_Assembly - Staple assembly - For stapler/stacker and booklet-maker unit
Q3931-67930	PC_Board - DC controller PC board assembly
RM1-4140-000CN	PC_Board - Saddle controller PCA assembly
FL2-0846-000CN	Stacker_Assembly - Stapler unit - Located on the saddle stapler assembly
Q3931-67912	Drive_Assembly - Toner cartridge drive assembly - Metal plate with gears attached - Provides movement to the cyan and black cartridges
FM2-0722-000CN	Stapler - Stapler sub-assembly - Includes upper and lower clinch guide, staple unit and motor (M14), bin sensor flag, photo interrupter (PI46), and staple mount
RM1-4109-000CN	Feeder - Saddle paper feeder assembly - Includes saddle motor assembly and lower entrance guide assembly - For the booklet maker
RM1-3652-000CN	Reversing_Unit - Reversing assembly for duplexer assembly
Q3931-67913	Drive_Assembly - Toner cartridge drive assembly - Metal plate with gears attached - Provides movement to the yellow and magenta cartridges
CB380A	Drum - HP COLOR LASERJET BLACK PRINT CARTRIDGE 823A
RM1-4136-000CN	Feeder - Saddle paper feeder assembly - Includes saddle motor assembly and lower entrance guide assembly - For the stapler/stacker
Q3931-67909	Transfer_Assembly - Secondary transfer assembly - Located at bottom of the intermediante transfer betl (ITB) assembly
RM1-3686-000CN	Guide - Intermediate lowerr feed guide assembly
CB384-67901	Cartridge - Black print toner cartridge - For the Color LaserJet CP6015 series
RM1-3333-000CN	Door - Right door sub assembly
RM1-4125-000CN	Tray - Operation-tray assembly - Includes operational tray cable and photo interrupter (TLP1242)
RM1-3293-000CN	Delivery - Face down paper delivery assembly
RM1-3665-000CN	Feeder - Duplexing feed assembly
Q3931-67918	Tray - 500-sheet paper input tray cassette - For use with tray 2
Q3931-67919	Roller - Paper pick-up roller and retard roller kit - Includes one pick-up roller, one retard roller, and two paper feed rollers - Use with tray 2,3,4, and 5
Q3931-67938	Roller - Paper pick-up roller - Includes one pick-up roller, and two paper feed rollers - Use with tray 2,3,4, and 5
RM1-3356-000CN	Door - Printer front door assembly
RM1-3218-000CN	Power_Supply - Fuser power supply assembly
RM1-5475-000CN	PC_Board - High voltage transfer \|B\| PCA assembly
RM1-3582-000CN	PC_Board - High voltage transfer \|A\| PCA assembly
RM1-4119-000CN	Cover - Middle height cover assembly for the booklet maker unit
4G3-0671-000CN	Plate - Inner side plate assembly - Used on the booklet market series only
RM1-3206-000CN	Pickup_Assembly - Paper cassette pick-up assembly - Includes 1 pick roller and 2 feed rollers
Q3931-67917	PC_Board - Cartridge interface assembly kit
RM1-3345-000CN	Pickup_Assembly - Multi-purpose/tray 1 paper pick-up assembly
Q3931-67903	Memory - 256MB, 167MHZ, 200-pin DDR DIMM memory module
RM1-4516-000CN	Control_Panel - Control panel assembly - Control buttons and display located on top front of printer
FM2-0730-000CN	Pressure_Assembly - Pressure roller assembly - For the stapler/stacker and booklet-maker
RM1-4108-000CN	Guide - Swing guide assembly - Includes swing roller assembly, swing jam clearing label, swing press assembly, swing roller shaft assembly, and the paper delivery gate arm
RM1-3585-000CN	PC_Board - Memory tag PCA assembly
RC2-1278-000CN	Cover - Rear cover - Plastic cover that protects the rear part of the stapler/stacker unit
RM1-3222-020CN	Lifter - Lifter-drive-assembly
Q3931-67921	Tray - Duplex switchback tray
RM1-4172-000CN	Guide - Entrance upper guide assembly - For the stapler/stacker and booklet maker unit
4G3-0769-000CN	Motor - Ejection stack motor (M32) assembly
RM1-4130-000CN	Delivery - Saddle paper delivery assembly
FM2-0756-000CN	Guide - Saddle guide assembly - Mounts on the front saddle side plate - For the booklet maker
RM1-4135-000CN	Guide - Lower height guide assembly
FM2-1409-000CN	Motor - Press motor (M36) assembly
4G1-2283-000CN	Cable - CABLE, SADDLE UNIT
RC1-9313-000CN	Filter - Air filter - Located on the upper right side of the printer behind the upper right cover
RM1-4104-000CN	Tray - Stack tray assembly - Includes front and rear extension tray guide, stack tray, and extension tray
RM1-3232-000CN	Case - Thermopile case assembly
RL1-1477-000CN	Cover - Lower internal cover assembly - Internal cover for the saddle assembly - For the booklet maker unit only
4A3-1783-000CN	Roller - ROLLER, FOLDING
RM1-3366-010CN	Drive_Assembly - Drive assembly - For use with multi-purpose/tray 1
RM1-3258-000CN	Sensor - Color plane registration sensor assembly
RM1-3341-000CN	Tray - Multi-purpose/tray 1 drop down door paper input tray assembly
RM1-4121-000CN	Door - Upper cover assembly - Top door located on the stapler/stacker assembly
RM1-4519-000CN	Motor - Fuser DC motor (M11) assembly - Drives the fuser roller, the delivery roller, and the fuser pressure roller
Q3938-67959	Roller - Paper pick-up roller - Includes one pick-up roller, and two paper feed rollers - Use with tray 2,3,4, and 5
RM1-3253-000CN	Cage - Formatter board cage assembly - Metal shield and enclosure for the formatter board
FM2-0737-000CN	Motor - Saddle motor assembly - Includes primary transfer roller disengagement motor(M9) and motor mount
RL1-1210-000CN	Cover - Rear cover - Plastic cover that protects the rear part of the printer
FG3-2887-000CN	PC_Board - Tray driver PCA assembly
RC2-1351-000CN	Cover - Lower internal cover (stapler/stacker only)
RM1-4123-000CN	Cover - Inner cover assembly - Inner cover located on the left side of the finisher main body
Q3931-67905	Cover - Face down cover - Output paper cover on top of the printer - Holds the paper after it has been printed
RM1-4131-000CN	Guide - Upper delivery guide assembly - For the saddle assembly
RC1-9336-000CN	Cover - Left cover assembly - Plastic cover that protects the left side of the printer
RM1-3286-000CN	Motor - Drum motor (M15) assembly - Drives the photosensitive drum and the primary charging roller in the black imaging drum
FG3-2892-000CN	Cable - CABLE, SOLENOID
RM1-4110-000CN	Guide - Lower entrance guide assembly - Located on the saddle paper feeder assembly
RM1-3247-000CN	Gear - Fuser one way gear assembly
RM1-3247-020CN	Gear - Fuser one way gear assembly
RM1-3247-020CN	Gear - Fuser one way gear assembly
RM1-4129-000CN	Cover - Upper left cover assembly - Plastic cover that protects the upper left side of the booklet maker
RC1-9339-000CN	Cover - Right upper cover - Located on top of the right door assembly
4G3-0725-000CN	Guide - Motor guide assembly - Located on the saddle assembly - For motor (M3)
Q3931-67920	Roller - Paper pick-up retard roller - Used for tray 1
RM1-3238-000CN	Plate - Cyan partition plate assembly
RM1-3235-000CN	Plate - Yellow partition plate assembly
RM1-3280-000CN	Drive_Assembly - Intermediate transfer belt (ITB) estrangement drive assembly
RM1-3233-000CN	Cover - Left side wall cover assembly
4H3-0370-000CN	Clutch - Electromagnetic shutter clutch (CL31) connector (J1046)
RM1-3354-000CN	Plate - Rear mount cover plate assembly
RK2-1366-000CN	Motor - Toner feed motor (M17) - Drives the yellow, magenta, and cyan toner feed screws and waste toner feed screws - Mounts on the toner cartridge drive assembly
RM1-3291-000CN	Guide - Multi-purpose/tray 1 guide assembly
RM1-3237-000CN	Plate - Magenta partition plate assembly
RM1-3612-000CN	Cable - FIXING JOINT CABLE
4G3-0934-000CN	Sensor - Paper face sensor assembly
RU5-6035-000CN	Guide - Tray roller guide - Located on the output bin 1
RM1-0037-020CN	Roller - Paper feed/seperation roller assembly - Black rubber roller on a blue plastic cylinder
Q7829-67925	Roller - Feed roller high capacity input (HCI) - Transmit the paper from the cassette and feeds it to the device entrance (blue)
RC2-1283-000CN	Panel - Upper height panel - Located on the stapler/stacker unit
RL1-1280-000CN	Cover - Right lower cover assembly
RM1-4107-000CN	Sensor - Area sensor flag assembly - Includes flag area sensor plate - Located on the finisher main body
RM1-3364-000CN	Fan - Exhaust fan assembly - Cools the fuser area
RM1-3618-000CN	Other_Parts - REAR LOWER CABLE
4G3-1777-000CN	Cable - Staple connecting cable assembly
4K1-1103-000CN	Motor - Stepping motor (M5) connector (J113)
FL2-0821-000CN	Solenoid - Solenoid (SL34) - Buffer rear end holding solenoid drive signal
FM2-0763-000CN	Sensor - Rear end sensor assembly
FC5-5436-000CN	Rail - Rail rack - Mounts on the finisher main body - Four used
RM1-3252-000CN	Holder - Main switch (SW11) holder assembly
RC1-9341-000CN	Cover - Control panel support cover assembly - Includes the base structure, and control panel support piece - Mounts to the top of the ADF assembly - Does NOT include the control panel
RC1-8519-000CN	Torque_Limiter - Torque limiter - Located next to paper pick-up retard roller in multi-purpose/tray 1 assembly
XF2-1608-840CN	Belt - Timing belt - Located on the return roller assembly
RM1-3230-000CN	Holder - Transfer contact holder assembly
RM1-3610-000CN	Cable - DC controller board power cable
4S3-2117-000CN	Spring - Tension spring - Provides tension to the front pressure plate (big spring)
4G1-2285-000CN	Cable - Sensor cable - Located on the saddle tray assembly - Connects on the photo interrupter (TLP1242)
RM1-3340-000CN	Tray - Face down end tray assembly
RC2-1315-000CN	Caster - Caster - Used on pedestal assembly (universal)
RL1-1284-000CN	Cover - Top cover assembly - Protects the top part of the main printer chassis
FM2-0720-000CN	Mount - Flexible cable mount assembly
FM2-1708-000CN	Sensor - Option sensor assembly - Includes the photo interrupter (TLP1424) and bracket
4G3-0210-000CN	Lock - Upper cover lock assembly
RC1-9342-000CN	Cover - Rear upper cover - Plastic cover that protects the upper rear part of the printer
4S3-0171-000CN	Gear - 50-tooth gear - Located on the saddle assembly
FM2-1417-000CN	Sensor - Sensor/switch assembly - Includes leaf spring, micro switch (MSW31), photo interrupter (PI32), and wire saddle
RM1-3215-000CN	Lock - Intermediate transfer belt (ITB) rear lock support assembly
RK2-1382-000CN	Fan - Delivery unit cooling fan (FM7)
RC2-1284-000CN	Guide - Side wall guide - Mounts on the upper height panel on the booklet maker unit
RM1-3228-000CN	Lock - Intermediate transfer belt (ITB) front lock support assembly
RC1-8526-000CN	Guide - Multi-purpose/tray 1 upper guide
RM1-3620-000CN	Cable - SCANNER JOINT CABLE
RM1-4411-000CN	Arm - T2 guide arm assembly
RM1-3617-000CN	Other_Parts - FRONT CABLE
RM1-3619-000CN	Other_Parts - REAR UPPER CABLE
XF2-3837-340CN	Belt - Timing belt - Belt that runs on the 30-tooth pulley on the saddle assembly
RM1-3589-000CN	Interlock - Interlock switch assembly - Where the right door open detection sensor (SR11) mounts on
RM1-3254-000CN	Holder - Cartridge contact holder assembly
RC1-9206-000CN	Rail - Rear reverse scanner rail
RK2-2376-000CN	Sensor - SENSOR UNIT, HUMIDITY
RL1-1335-000CN	Guide - GUIDE, DUPLEXING FEED, UPPER
RM1-3240-000CN	Drawer - Intermediate transfer belt (ITB) drawer assembly
FM2-0710-000CN	Switch - Approach switch assembly - Includes approach switch plate and microswitch (MS33)
FM2-1423-000CN	Shaft - Swing press shaft assembly
FM2-0707-000CN	Sensor - Paper sensor assembly - Includes the paper sensor arm, photo interrupter (PI42), and paper sensor plate
FB3-7928-020CN	Deflector - Paper deflector (flapper 1) - Shaft with curved deflector fingers - Attaches to the front and rear saddle side plate
RC2-1347-000CN	Cover - Slide cover - Plastic cover that slide in to the upper height panel on the stapler/stacker unit
RL1-1283-000CN	Guide - Multi-purpose/tray 1 right guide assembly
RM1-3239-000CN	Cover - Right side wall cover assembly
RC1-8959-000CN	Guide - GUIDE, FACE-DOWN INNER
RC1-9278-000CN	Holder - Fuser fan holder - Holds fan (FM2)
RC1-9511-000CN	Cover - COVER, MOTOR
RC1-9344-000CN	Cover - Left rear cover - Plastic cover that protects the left rear part of the printer - Corner cover with slot for I/O connectors
FC5-3657-000CN	Torque_Limiter - Torque limiter - Torque limiter for the swing press shaft
FM2-1639-000CN	Mount - Delivery switch mount assembly
RM1-4415-000CN	Cover - Rear right cover assembly
RM1-4392-000CN	Roller - Retard roller - Mounts on the multi-purpose roller assembly next to the limiter torque
RC1-9348-000CN	Cover - COVER, INTERNAL, RIGHT
FB5-2697-000CN	Deflector - Paper deflector (flapper 2) - Shaft with curved deflector fingers - Attaches to the front and rear saddle side plate
RM1-4128-000CN	Mount - Lattice cable mount assembly
RM1-4407-000CN	Guide - Paper delivery guide assembly
RM1-4409-000CN	Cable - Fuser bias cable assembly
4S3-1050-000CN	Bearing - Ball bearing (6902ZZNR)
RK2-1377-000CN	Fan - Cooling fan - Provides air to the print cartridge and imaging drum area
FM2-0709-000CN	Holder - Area sensor holder assembly
RC2-1280-000CN	Cover - Lower left cover - Mounts on the saddle tray assembly
RK2-1378-000CN	Fan - Fuser cooling fan (FM2) - Provides air to the fuser area
4G3-0271-000CN	Link - Slide link assembly - Located on the top door assembly (upper cover)
4S3-2116-000CN	Spring - Tension spring - Provides tension to the front pressure plate (small spring)
4G1-1498-000CN	Sensor - Area sensor PCA assembly - Located on the area sensor holder assembly
FG3-2903-000CN	Cable - CABLE, OPERATION TRAY
RK2-1356-000CN	Cable - Flexible flat cable - Connects to the formatter board through the (J9001) connector and to the DC controller PCA through (J123) connector
RM1-3225-000CN	Grip - Front grip support assembly
RM1-3226-000CN	Grip - Rear grip support assembly
RM1-5950-000CN	Cover - Fuser fan cover assembly - Plastic cover located next to the rear cover assembly
RC1-9279-000CN	Holder - Scanner fan holder - Holds fan (FM1)
FU5-0454-000CN	Gear - 40-tooth gear - Runs on the swing press shaft assembly - Located between torque limiter and bushing on the rear side plate of the finisher
RK2-1370-000CN	Motor - Toner feed motor (M16) - Drives the black toner feed screws and waste toner feed screws - Located on the toner cartridge drive assembly
RM1-4401-000CN	Duct - Intermediate transfer belt (ITB) duct assembly
FC5-4221-000CN	Guide - Tray roller guide - Mounts on the front side tray plate
RL1-1215-000CN	Rail - Right cassette rail - For the 1 x 500-sheet paper input tray
RC1-9276-000CN	Duct - Cartridge duct - Plastic duct that vents air from the fan (FM3) to the cartridge area
RC1-9318-000CN	Other_Parts - GUIDE, CABLE, E
RC1-9277-000CN	Holder - Cartridge fan holder - Holds fan (FM3)
RM1-3391-000CN	Cable - FACE-DOWN UNIT 2 CABLE
RM1-4141-000CN	PC_Board - LED PCA assembly - Located on the stapler/stacker unit rear cover
RM1-4402-000CN	Holder - Tag PCA holder assembly
XB4-5401-209CN	Screw - Screw - M4 X 8mm long
RC1-9309-000CN	Duct - Scanner fan duct - Directs air into scanner area
RL1-1213-000CN	Rail - Left top rail - For the 1 x 500-sheet paper input tray
RM1-3250-000CN	Sensor - Photo sensor (SR26) assembly - Fuser home position sensor
4A3-1779-000CN	Plate - Rotation plate - Located next to the dowel pin on the saddle assembly
RM1-4391-000CN	Flag - Face down full flag assembly
RC1-9308-000CN	Other_Parts - GUIDE, CABLE, C
RM1-3623-000CN	Cable - INTERFACE JOINT CABLE
RC1-9261-000CN	Clamp - Formatter cable clamp - Holds formatter cable in a determine position
FM2-1401-000CN	Sensor - Shutter sensor assembly
4G3-1624-000CN	Sensor - Paper face sensing assembly - Located on the upper height panel
4A3-1955-000CN	Plate - Grounding plate - Used only for booklet maker series
WG8-5696-000CN	Sensor - Photo-interrupter sensor assembly (Does not include the sensor flag)
RM1-4400-000CN	Guide - Guide sensor assembly - For fuser open cover detection sensor (SR34)
FB3-7881-000CN	Knob - Knob - Mounts on the lower internal cover on the left side of the saddle assembly
RM1-3624-000CN	Cable - Color plane registration joint cable
FC5-6978-000CN	Plate - PLATE, OPTION TRAY, FRONT
RC1-8527-000CN	Cover - Multi-purpose/tray 1 blanking cover
RC1-9211-000CN	Cover - COVER, MAIN SWITCH
RC1-9323-000CN	Other_Parts - GUIDE, CABLE, F
RC1-8961-000CN	Duct - Air duct - Deflects air from fan FM7
XF9-0748-000CN	Belt - Timing cogged belt - Located on the front side plate on the finisher main body
RC1-9043-000CN	Other_Parts - BAND, DOOR
RG5-1928-000CN	Cable - Registration cable assembly - Includes 7P and 3P connectors
RC1-9334-000CN	Other_Parts - DUCT, SCANNER
RK2-1354-000CN	Cable - Laser flexible flat cable - Connects the laser driver PCA through (J501B) connector and the DC controller PCA through (J127) connector
RM1-5030-000CN	Cable - CABLE, TP/T2 OPEN SENSOR
RC1-9185-000CN	Guide - Intermediate transfer belt (ITB) front entrance guide
RM1-3217-000CN	Cable - FIXING MOTOR CABLE
RM1-3622-000CN	Cable - PANEL JOINT CABLE
RK2-1363-000CN	Thermistor - Thermistor unit - Monitors the temperature inside the scanners
FC5-5004-000CN	Sensor - Paper sensing sensor flag - Mounts on the lower height panel
RC1-9201-000CN	Cover - Paper tray cassette back end cover - Protects the back end of the cassette tray rail
RC1-8928-000CN	Lever - Paper sensing lever - Senses paper in intermediate transfer belt (ITB) duct assembly
RC1-9307-000CN	Other_Parts - GUIDE, CABLE, B
FU5-0457-000CN	Gear - 17-tooth gear - Attaches to the rear tray side plate
RC2-1279-000CN	Cover - Connector tray cover - Mounts on the upper left side of the rear cover on the stapler/stacker unit
RC1-8511-000CN	Retainer - Retainer (C Type) for Color LaserJet CP6015n.
FU5-1169-000CN	Bushing - Bushing - Attaches to the rear tray side plate - Located next to the 26-tooth gear on the tray drive shaft assembly
FC5-5024-000CN	Knob - Latch knob - Mounts on the open/close guide on the saddle guide assembly
FS6-0829-000CN	Gear - 16/56-tooth gear - Runs on the folding roller next to the front adjustment arm
RC1-9190-000CN	Plate - PLATE, FAN FIXING, FRONT
FU5-9059-000CN	Screw - M3 X 6mm machine thread screw with attached washer - Used to secure metal to metal
RM1-3389-000CN	Cable - Control Panel cable
XF2-1607-860CN	Belt - Timing cogged belt - Runs on ejection stack motor assembly (M32)
RK2-1355-000CN	Cable - Laser flexible flat cable - Connects to the laser driver PCA through (J501A) connector and the DC controller PCA through (J126) connector
FM2-0718-000CN	Flag - Entrance sensor flag assembly - Includes the entrance sensor lever and the entrance sensor arm damper
RC1-9186-000CN	Guide - Intermediate transfer belt (ITB) rear entrance guide
RC1-9332-000CN	Guide - Fuser cable guide - Located on the fuser power supply assembly
RC1-9306-000CN	Other_Parts - GUIDE, CABLE, A
FB3-7934-000CN	Rack_Slide - Rear rack slide - Mounts on the rear saddle side plate
FB3-7967-000CN	Rack_Slide - Front rack slide - Mounts on the front saddle side plate
RM1-3385-000CN	Cable - Toner feed motor (M16) cable
RM1-3390-000CN	Cable - FACE-DOWN UNIT 1 CABLE
RC1-9246-000CN	Plate - Front sensor plate - For sensor (SR32)
RC1-8964-000CN	Duct - Face down joint duct - Located behind the fuser assembly
FU5-0435-000CN	Gear - 44-tooth gear - Mounts on the front tray side plate attached to the upper tray cross member
RC1-9312-000CN	Other_Parts - GUIDE, CABLE, D
FS5-3576-000CN	Gear - 30-tooth gear
4A3-1763-000CN	Arm - Front adjustment arm - Located on the folding roller on the saddle assembly
4A3-1764-000CN	Arm - Rear adjustment arm - Located on the folding roller on the saddle assembly
4A3-1782-000CN	Stop - Lever stopper
RU5-0790-000CN	Gear - 83/25-tooth gear - Mounts on the fuser motor plate
RC1-9189-000CN	Other_Parts - ARM, 1ST ESTRANGEMENT
FU5-2399-000CN	Gear - 29-tooth gear - Runs on the paper feeder motor assembly
FS5-3577-000CN	Pulley - 39-tooth pulley - Runs on the woodruff roller - Located next to the roller flag
RC1-9326-000CN	Plate - HVT-A (high-voltage transmission) guard plate
RC1-8931-000CN	Rail - RAIL, FIXING, FRONT
RC2-1356-000CN	Ground - Grounding plate - Located on the rear left side of the saddle assembly
RC1-9360-000CN	Cover - COVER, FACE-DOWN DRIVE
RC2-1734-000CN	LED - LED window - Mounts on the upper left side on the rear cover assembly of the stapler/stacker unit
FU5-3086-000CN	Pulley - 20-tooth pulley
FS6-0830-000CN	Gear - 16-tooth gear - Runs on the folding roller next to the front adjustment arm
RM1-3630-000CN	Cable - Multi-purpose/tray 1 cable
FS6-0822-000CN	Gear - 16/33-tooth gear - Runs on the shaft located under the folding roller
RM1-3383-000CN	Cable - Toner feed motor (M17) cable
RC1-9324-000CN	Holder - Environment sensor holder - Holds the humidity sensor unit
RC1-9220-000CN	Lever - LEVER, DOOR INTERLOCK SHUTTER
RC1-9235-000CN	Plate - PLATE, DRAWER GUARD
RC1-9300-000CN	Other_Parts - BUTTON, MAIN SWITCH
RC1-9238-000CN	Plate - PLATE, CONTROL PANEL GROUNDING
XD9-0234-000CN	Clip - E-Type retainer ring
FU5-0428-000CN	Gear - 30-tooth gear - Runs on the timing belt on the finisher lower roller next to the 20-tooth pulley
FB3-7980-000CN	Spring - Torsion spring - Provides torsion to flag sensor located on the rear saddle side plate
FS6-0815-000CN	Gear - 32-tooth gear/16-tooth pulley - Located on the drive support in front of the motor (M5)
FS6-0823-000CN	Gear - 16-tooth gear - Runs on the shaft located under the folding roller
FS6-2582-000CN	Spring - Tension spring - Provides tension to the pressure plate assembly
FC5-5542-000CN	Guide - Entrance sheet guide - Mounts on the cross member entrance guide
FB3-7973-000CN	Holder - Roller holder 2 - For the cam shaft
FB3-7925-030CN	Flag - Roller flag - Mounts next to the 39-tooth pulley on the saddle assembly
XA9-1495-000CN	Screw - Wafer head machine screw - M3, 6mm long, No. 2 Phillips recess - Secures metal to sheet metal
XA9-1504-000CN	Screw - M3 truss head (flanged) screw - 8mm long
XA9-1801-000CN	Screw - M13x12 RS screw - Used to secure metal to metal
XB1-2300-407CN	Screw - M3x4 machined truss-head screw
XB1-2400-805CN	Screw - SCREW MACHINE TRUSS HEAD M4
WT2-5694-000CN	Clamp - Snap-in cable clamp
XA9-1422-000CN	Screw - M4 X 12mm machine screw with washer
XA9-1448-000CN	Screw - Screw - M4 X 8mm long
XA9-1449-000CN	Screw - M3 pan-head Phillips screw with machine threads - 8mm long
XA9-1469-000CN	Hardware - Machine screw with attached washer - M3, 10mm - Used to hold plastic to metal
RU5-0791-000CN	Gear - 34-tooth gear - Mounts on the fuser motor plate
RU5-2796-000CN	Spring - Tension spring - Provides tension to the paper sensing lever
RU5-2822-000CN	Spring - Tension spring - Provides tension to the scanner assembly
RU5-2825-000CN	Spring - Torsion spring - Located on the back of the scanner assembly
VS1-7177-002CN	Connector - Fuser electrical connector
RM1-5029-000CN	Cable - CABLE, FIXING OPEN SENSOR
RC1-9233-000CN	Other_Parts - SPRING, LEAF
XB4-7401-005CN	Screw - M4 truss head (flanged) screw - 10mm long - Typically used to secure plastic parts to the left and right side plates
XB6-7303-005CN	Screw - Machine screw - M3, 30mm long with self-tapping threads - Typically used to hold metal to plastic
XD2-3100-152CN	Ring - C-type external retainer ring
XD3-2300-142CN	Pin - Dowel pin - Located next to the 17-tooth gear on the output bin 2
XD3-2300-202CN	Pin - Dowel pin - Locate next to the 50-tooth gear
FB5-5937-020CN	Flag - Flag sensor - Located next to the ball bearing (6902ZZNR) - Mounts on the rear saddle side plate
FB3-7979-000CN	Flag - Flag sensor - Located on the rear saddle side plate
FC5-5005-000CN	Spring - Torsion spring - Provides torsion to the paper sensing sensor flag located on the lower height panel
FS6-0814-000CN	Gear - 16-tooth gear/32-tooth pulley - Located on the rear part of the lower pass guide next to the 32-tooth gear/16-tooth pulley
XD9-0240-000CN	Other_Parts - PIN, DOWEL
FC5-5021-000CN	Latch - Right latch claw
4A3-4715-000CN	Plate - Stop hinge plate - Used only for booklet maker series
RC1-9244-000CN	Spring - Torsion spring - Provides torsion to the front fuser fan plate
RC1-9260-000CN	Holder - HOLDER, SCANNER THERMISTOR
RC1-9328-000CN	Holder - High voltage connector holder - Located on the left side of the printer chassis - Attaches behind the main switch cover
RC1-9329-000CN	Guide - Cable guide - Cover for the panel cable
RC1-8939-000CN	Rail - RAIL, FIXING, REAR
RC1-8734-000CN	Bushing - Bushing - Located on the registration second transfer assembly
RC1-9208-000CN	Foot - Chassis rubber foot
RL1-1216-000CN	Plate - Fuser motor (M11) plate
RL1-1289-000CN	Roller - Paper pick-up roller - For the 1 x 500-sheet and 3 x 500-sheet paper input tray
RC1-8567-000CN	Roller - Multi-purpose paper pick-up roller
RM1-3360-000CN	Cover - Switchback cover assembly
RM1-4113-000CN	Tray - Booklet-output bin (saddle tray assembly) - Includes sensor cable and photo interrupter (TLP1242)
RM1-3319-000CN	Roller - 2nd transfer roller assembly
UL413E	Care_Pack - HP 3 year Next business day Onsite Defective media retention color LaserJet CP6015 Support
UL414PE	Care_Pack - HP 1 year PW Next business day Onsite Defective media retention color LaserJet CP6015 Support
UL624E	Care_Pack - HP Secure Hard Disk Installation and Startup Service
H2872E	Care_Pack - HP Network Installation mid-high Color LaserJet printer Service
H4515E	Care_Pack - HP Installation mid-high Color LaserJet printer Service
HC130PE	Care_Pack - HP 1 year Post Warranty Phone Assist Color LaserJet 3-9xxx/Scanjet N7xxx-9xxx Service
Q3932A	Color_LaserJet - HP Color LaserJet CP6015dn Printer
UJ177E	Care_Pack - HP 3 year Next business day Onsite Color LaserJet CP6015 Hardware Support
UJ178E	Care_Pack - HP 4 year Next business day Onsite Color LaserJet CP6015 Hardware Support
UJ179E	Care_Pack - HP 5 year Next business day Onsite Color LaserJet CP6015 Hardware Support
UJ180E	Care_Pack - HP 3 year 4 hour response 9x5 Onsite Color LaserJet CP6015 Hardware Support
UJ181E	Care_Pack - HP 3 year 4 hour response 13x5 Onsite Color LaserJet CP6015 Hardware Support
UJ182E	Care_Pack - HP 4 year 4 hour response 9x5 Onsite Color LaserJet CP6015 Hardware Support
UJ183E	Care_Pack - HP 4 year 4 hour response 13x5 Onsite Color LaserJet CP6015 Hardware Support
UJ184E	Care_Pack - HP 5 year 4 hour response 9x5 Onsite Color LaserJet CP6015 Hardware Support
UJ185E	Care_Pack - HP 5 year 4 hour response 13x5 Onsite Color LaserJet CP6015 Hardware Support
UJ186PE	Care_Pack - HP 1 year Post Warranty Next business day Onsite Color LaserJet CP6015 Hardware Support
UJ187PE	Care_Pack - HP 1 year Post Warranty 4 hour response 9x5 Onsite Color LaserJet CP6015 Hardware Support
UJ188PE	Care_Pack - HP 1 year Post Warranty 4 hour response 13x5 Onsite Color LaserJet CP6015 Hardware Support
UJ189E	Care_Pack - HP MKRepl Color LaserJet CM6030/40MFP and CP6015 Color printer fuser 110V Service
UJ192E	Care_Pack - HP MK Repl Clr LaserJet CM6030/40MFP and CP6015 Color printer TransferKit Service
UJ573E	Care_Pack - HP MK Replacement Color LaserJet CM6030/40MFP and CP6015 Color Roller Kit Service
UT808PE	Care_Pack - HP 2 year Post-Warranty Next business day onsite Color LaserJet CP6015 Hardware Support
UT981E	Care_Pack - HP 4 year Next business day Onsite + Defective Media Retention Color LaserJet CP6015 Support
UU862E	Care_Pack - HP 5 year Next business day Onsite + Defective Media Retention Color LaserJet CP6015 Support
Q3931-67906	Filter - Air filter kit
XG9-0586-000CN	Bearing - Ball bearing - Located on the fixing one way gear assembly
RC1-8925-000CN	Gear - DAMPER, GEAR
RM1-3640-000CN	Cable - Waste toner sensor cable
XB2-8300-607CN	Screw - M3x6 screw with washer

Previous HP Color LaserJet 3600DN Parts

Next HP Color LaserJet CP4525n Parts

Company Profile

4 3 2 1

Slon is a R & D and manufacturing printer accessories and supplies Health providers, having the best technical staff and R & D strength. Slon is committed to provide users with perfect printing supplies,hp laser printer parts,hp printer repair, hp printer service. Barcode scanner usb,Copier parts,Copier repair parts,Label printer parts SLon Wumart is committed to provide customers with products and prices and sincere hospitality services, and more business development in the new areas to strengthen the Group in Hong Kong, Mainland China and overseas to be the industry leader. Looking to the future, the Company's members will continue to enhance management standards, satisfactory returns for investors, and to embrace the opportunities and challenges! Deeply thank all the people who support and concern SLon development!

qr-code

connect with us