HP LaserJet 9040 MFP Printer Parts

Jul 30,2012

Click Part Number to view item detail and ordering information.
Part Description
RG5-7379-000CN ADF  - ADF main assembly - Includes the main assembly structure pieces, ADF scanner (optical) assembly, registration guide assembly, release handle, and various other components - Mounts in the top of the ADF paper pickup assembly
RG5-7379-040CN ADF  - ADF main assembly - Includes the main assembly structure pieces, ADF scanner (optical) assembly, registration guide assembly, release handle, and various other components - Mounts in the top of the ADF paper pickup assembly

RG5-6300-070CN ADF  - ADF main assembly
C8085A Stacker_Assembly  - Optional 3000 sheet stapler/stacker assembly - Stacks up to 3000 sheets of standard paper (20-lb bond) on the stapler bin, staples in multiple positions up to 50 sheets, and has job offset capabilities for easy handling
RG5-6300-000CN ADF  - ADF main assembly
C8084A Stacker_Assembly  - Optional 3,000-sheet paper output stacker assembly - Stacks up to 3000 sheets of standard paper(20-lb bond) on the stacker bin, has job offset capabilities for easy handling, and job separation (first page offset) for shared environments
C8085-60566 Accumulator  - Accumulator assembly - Holds paper until print job finish then moves to stapler or correct output bin
Q5693A Mailbox  - HP 8-bin mail box (multibin) - Provides a face-up bin (upper bin) and eight face-down bins that can be assigned to individual users or workgroups - The device also functions as a job separator, stacker, and sorter/collator
C8085-60558 Accumulator  - Accumulator assembly - Holds paper until print job finish then moves to stapler or correct output bin
C8085-60531 Accumulator  - Accumulator assembly
RH5-3075-090CN PC_Board  - Scanner control PC board - Controls the scanner and ADF functions - Connects to all the drive motors in both units and all the sensors in the scanner - Mounts in rear of the scanner towards the left rear
C8523-69011 PC_Board  - Scanner Control PC board - Controls the scanner and ADF functions - Connects to all the drive motors in both units and all the sensors in the scanner - Mounts in rear of the scanner towards the left rear
C8531-67902 Other_Parts  - SEE C8531-69004
C8085-60551 Flipper  - Paper flipper assembly - Mounts on top of the paper path router assembly - Flips sheet of paper from face-up to face-down to route to stacker properly
Q2628-67951 Memory  - HP 512MB 100-pin DDR DIMM - Used to add flash memory-based accessory fonts, macros, and patterns
C8085-60500 Flipper  - Paper flipper assembly - Mounts on top of the Paper Path Router assembly
RG5-6307-000CN Optical_Unit  - ADF scanner (optical) assembly - Includes the chassis assembly, scanner lens assembly (includes the Charge Coupled Device (CCD)), the scanning lamp, ADF analog processor board, and ADF inverter board - Major portion of the ADF main assembly
C8085-60548 PC_Board  - Stacker/stapler controller PC board - Mounts just above the power supply assembly
C8085-60560 PC_Board  - Stacker/stapler controller PC board - Mounts just above the power supply assembly
RG1-4386-020CN Power_Supply  - Scanner power supply assembly - Includes the power supply electronics, fan, and support bracket - Provides power for the ADF and scanner assemblies - Mounts on the rear of the scanner assembly
C8531A Input_Assembly  - HP 2000 Sheet High Capacity Input Tray
C8531-69018 Tray  - 2,000-sheet high capacity paper feeder assembly
4G1-5218-000CN Stapler  - Stapling unit - Stapler assembly for the stapler/stacker unit
RG5-6307-020CN Optical_Unit  - ADF scanner (optical) assembly - Includes the chassis assembly, scanner lens assembly (includes the Charge Coupled Device (CCD)), the scanning lamp, ADF analog processor board, and ADF inverter board - Major portion of the ADF main assembly
RG5-6212-320CN Tray  - 2,000-sheet paper cassette tray (Tray 4) - Part number is for the paper tray ONLY
Q7720-67951 Memory  - HP 512MB 100-pin DDR DIMM - Used to add flash memory-based accessory fonts, macros, and patterns
4G1-5218-130CN Stapler  - Stapling unit - Stapler assembly for the stapler/stacker unit
C8531-69004 Tray  - Tray 4 assembly (complete) - 2,000-sheet high capacity paper feeder assembly
C9153-69007 Maintenance_Kit  - Maintenance Kit - For 220 VAC - Replacement parts after 350K pages - Includes, Fuser Assembly, seven feed/separation rollers, two pickup rollers and transfer roller
4G1-5220-000CN Deflector  - Paper deflector - Guides paper out of dispose assembly - Snap-locks on little tangs on the back of the internal paper path cover
C9152-69007 Maintenance_Kit  - Maintenance Kit - For 120 VAC - Replacement Parts after 350k Pages Includes, Fuser Assembly, 7 Feed/Separation Rollers, 2 Pickup Rollers and Transfer roller
C9121-67901 Memory  - 128MB, 100-pin SDRAM DIMM memory module
Q7719-67951 Memory  - HP 256MB 100-pin DDR DIMM - Used to add flash memory-based accessory fonts, macros, and patterns
RG5-7778-000CN Power_Supply  - Low voltage power supply assembly - For 100V to 127VAC operation - Mounts on the upper rear of the printer
RG1-4153-000CN Power_Supply  - Scanner power supply assembly - Includes the power supply electronics, fan, and support bracket - Provides power for the ADF and scanner assemblies - Mounts on the rear of the scanner assembly
Q5693-60530 PC_Board  - Controller PC board assembly - Includes the controller PC board and metal shield - Mounts on the bottom rear of the 8-bin mailbox assembly - Firmware 050316
Q7709-67951 Memory  - 133 MHz 128MB, 100-pin SDRAM DIMM memory module Synchronous DRAM DIMM
C8519-69036 Fuser_Assembly  - Fuser Assembly - For 220 VAC to 240 VAC - Bonds toner to paper with heat
Q3726-67905 PC_Board  - Formatter PC board assembly - For the LaserJet 9040MFP and 9050MFP versions
Q3726-69005 PC_Board  - Formatter PC board assembly - For the LaserJet 9040MFP and 9050MFP versions
RG5-7778-030CN Power_Supply  - Low voltage power supply assembly - For 100-127VAC operation - Mounts on the upper rear of the printer
4G1-5220-150CN Deflector  - Paper deflector - Guides paper out of dispose assembly - Snap-locks on little tangs on the back of the internal paper path cover
RG5-6263-000CN Optical_Unit  - Flatbed scanner optical assembly - Includes the support structure, lamp assembly, charge-coupled devices (CCD) and lens assembly, flatbed analog board, drive belt, and cables - Scans and digitizes documents placed on the flatbed scanner
Q5693-60502 Head_Assembly  - Elevator head assembly - Delivery head mechanism which outputs the transported paper to one of the selected face-down output trays
C9153-69006 Maintenance_Kit  - Maintenance Kit (220V) - Replacement parts after 350K pages - Includes, Fuser Assembly, seven feed/separation rollers, two pickup rollers and transfer roller
C9153A Maintenance_Kit  - Maintenance Kit (220V) - Replacement parts after 350K pages - Includes, Fuser Assembly, seven feed/separation rollers, two pickup rollers and transfer roller
C8519-69035 Fuser_Assembly  - Fuser Assembly - For 100 VAC to 127 VAC - Bonds toner to paper with heat
C8519-69022 Fuser_Assembly  - Fuser Assembly - For 100 VAC to 127 VAC - Bonds toner to paper with heat
C8085-60556 Carriage  - Stapler carriage assembly - Carriage assembly that carries the stapler cartridge back and forth
C8085-60503 Carriage  - Stapler carriage assembly - Carriage assembly that carries the stapler cartridge back and forth.
C8085-69503 Carriage  - Carriage assembly
5851-1838 Control_Panel  - Control panel assembly - Includes the display and control function buttons - Does NOT include the language specific overlay
RG5-5751-280CN Fuser_Assembly  - Fuser Assembly - Bonds toner to paper with heat - For 220-240V operation
RG5-6263-070CN Optical_Unit  - Flatbed scanner optical assembly - Includes the support structure, lamp assembly, charge-coupled devices (CCD) and lens assembly, flatbed analog board, drive belt, and cables - Scans and digitizes documents placed on the flatbed scanner
RG5-5750-000CN Fuser_Assembly  - Fuser Assembly - Bonds toner to paper with heat - For 100V to 127V Operation
RM1-7354-000CN Power_Supply  - POWER SUPPLY ASS Y
RG5-7779-030CN Power_Supply  - Low voltage power supply assembly - For 220-240VAC operation - Mounts on the upper rear of the printer
RG5-7779-000CN Power_Supply  - Low voltage power supply assembly - For 220V to 240VAC operation - Mounts on the upper rear of the printer
C9152-67907 Maintenance_Kit  - LaserJet 9000 series Maintenance Kit (120V) - Replacement parts after 350k pages -Includes Fuser Assembly, seven Feed/Separation rollers, two Pickup rollers and one Transfer roller
C9152-67906 Maintenance_Kit  - Maintenance Kit (120V) - Replacement Parts after 350k Pages Includes, Fuser Assembly, 7 Feed/Separation Rollers, 2 Pickup Rollers and Transfer roller
C9152-69006 Maintenance_Kit  - Maintenance Kit - For 120 VAC operation - Replacement parts after 350k pages - Includes fuser assembly, seven feed/separation rollers, two pick-up rollers and transfer roller 
4G1-5166-000CN Mechanism  - Paper folding mechanism - Perfoms booklet paper folding function
Q5693-60505 Attachment_Assembly  - Attachment assembly kit - Includes the attachment rod with ground wire and plastic sleeve - Secures the 8-bin mailbox assembly to the bottom of the printer
RG5-7779-020CN Power_Supply  - Low voltage power supply assembly - For 220-240VAC operation - Mounts on the upper rear of the printer
4G1-1483-050CN PC_Board  - DC controller PC board - Controls the timing and functionality of the multifunction finisher - Mounts on the rear frame above the power supply
C9153-67907 Maintenance_Kit  - Maintenance Kit - For 220 VAC - Replacement parts after 350K pages - Includes, Fuser Assembly, seven feed/separation rollers, two pickup rollers and transfer roller
RG5-6212-300CN Tray  - 2,000-sheet paper cassette tray (Tray 4) - Part number is for the paper tray ONLY
RG5-5684-000CN Fuser_Assembly  - Fuser Assembly - For 100 VAC to 127 VAC - Bonds toner to paper with heat
RG5-5750-270CN Fuser_Assembly  - Fuser Assembly - Bonds toner to paper with heat - For 100V to 127V Operation
C8519-69033 Fuser_Assembly  - Fuser Assembly - Bonds toner to paper with heat - For 100V to 127V Operation
RG5-5750-210CN Fuser_Assembly  - Fuser Assembly - Bonds toner to paper with heat - For 100V to 127V Operation
RG5-5750-240CN Fuser_Assembly  - Fuser Assembly - Bonds toner to paper with heat - For 100V to 127V Operation
J6073-61051 Hard_Drive  - HDD, EIO 40G ROHS HIGH PERFORMANCE HARD DISK - PLUGS IN ONE OF THE EXTENDED INPUT/OUTPUT (EIO) SLOTS 
RG5-5751-270CN Fuser_Assembly  - Fuser Assembly - Bonds toner to paper with heat - For 220-240V operation
RG5-5751-240CN Fuser_Assembly  - Fuser Assembly - Bonds toner to paper with heat - For 220V to 240V operation
C8519-69034 Fuser_Assembly  - Fuser Assembly - Bonds toner to paper with heat - For 220-240V
4G1-5220-200CN Deflector  - Paper deflector - Guides paper out of dispose assembly - Snap-locks on little tangs on the back of the internal paper path cover
C9152A Maintenance_Kit  - Maintenance Kit (120V) - Replacement parts after 350K pages includes, Fuser Assembly, seven Feed/Separation rollers, two Pickup rollers and Transfer roller assembly
C8085-60559 Power_Supply  - Stapler power supply
C9153-67906 Maintenance_Kit  - Maintenance Kit (220V) - Replacement parts after 350K pages - Includes, Fuser Assembly, seven feed/separation rollers, two pickup rollers and transfer roller
C8084-60500 Module  - Offset module for 3000 sheet stacker
C8084-60517 Module  - Offset module for 3000 sheet stacker
C8085-60534 Power_Supply  - Stapler power supply
C8532-69002 Duplexer  - Duplexer assembly - Enables double-sided printing by flipping the page over in the printing process
C8532-67902 Duplexer  - Duplexer assembly - Enables double-sided printing by flipping the page over in the printing process
C8084-60519 Power_Supply  - 3000 sheet stacker power supply
Q7708-67951 Memory  - 64MB SDRAM - 100MHz synchronous DRAM - DIMM package
Q7715-67951 Memory  - HP 64MB 100-pin DDR DIMM - Used to add flash memory-based accessory fonts, macros, and patterns
C8084-60504 Power_Supply  - 3000 sheet stacker power supply
Q5693-60525 Head_Assembly  - Elevator head assembly - Delivery head mechanism which outputs the transported paper to one of the selected face-down output trays
C8085-60501 Paper_Path_Module  - Paper path router - Mounts underneath the Paper Flipper assembly
C4785-60541 Power_Supply  - Mailbox power supply assembly - Provides +24VDC for motors and +5VDC for sensors and the control PC board
C8532A Duplexer  - Duplexer assembly kit - Required for two-sided printing - Includes the duplexer assembly and installation instructions (multi-lingual)
C4785-60545 Power_Supply  - Mailbox power supply assembly - Provides +24VDC for motors and +5VDC for sensors and the control PC board
Q5693-60501 Flipper  - Flipper assembly - Transports paper from the printer into the 8-bin mailbox assembly and either outputs it directly to the face-up output tray or flips it for transport to one of the face-down trays - Mounts on top of the assembly
RG5-6275-000CN Pickup_Assembly  - Paper pickup assembly - Includes the pickup structure pieces, motors, gears, belts, rollers and sloenoid (Does NOT include the ADF main assembly) - Mounts on top of the ADF base assembly towards the left end
RG5-6275-060CN Pickup_Assembly  - Paper pickup assembly - Includes the pickup structure pieces, motors, gears, belts, rollers and sloenoid (Does NOT include the ADF main assembly) - Mounts on top of the ADF base assembly towards the left end
RG5-5826-090CN Laser_Scanner  - Laser/Scanner assembly - Mounts on the support structure in the print engine frame assembly
C8532-69003 Duplexer  - Duplexer assembly - Enables double-sided printing by flipping the page over in the printing process
C8085-60552 Paper_Path_Module  - Paper path router - Mounts underneath the paper flipper assembly - Routes paper to the correct bin after leaving the flipper assembly
RG5-5681-090CN Pickup_Assembly  - Paper input unit - Entire assembly
RG5-5826-000CN Laser_Scanner  - Laser/Scanner assembly - Mounts on the support structue in the print engine frame assembly
RG5-7780-000CN PC_Board  - DC controller board assembly
C8085-60522 Stapler  - Stapler unit for 3000 sheet stapler/stacker
Q2679-67901 PC_Board  - Copy processor board assembly - Includes the PC board and support carrier frame - Plugs in one of the EIO slots on the printer
RG5-5681-030CN Pickup_Assembly  - Paper pickup assembly
RG5-5750-150CN Fuser_Assembly  - Fuser Assembly - Bonds toner to paper with heat - For 100V to 127V Operation
4G1-5170-000CN Power_Supply  - Low voltage power supply - Includes AC input power cord
J4101B Module  - HP JetDirect 300X external print server module (10Base-T and 100Base-TX) - Connects between printer parallel port and LAN network
RG5-5809-000CN Tray  - Multi-purpose Tray - Optional Tray 1 drop down paper input tray assembly only - Includes drop down flip out tray and paper width guides
Q6005-67901 PC_Board  - Copy processor board assembly - Includes the PC board and support carrier frame - Plugs in one of the EIO slots on the printer
C8085-60563 Stapler  - Stapler unit for 3000 sheet stapler/stacker
Q5693-67922 Flipper  - Flipper assembly (with cable) - Moves paper from printer to face down mailbox tray or the face up bin on top - Includes firmware chip
J7934-61011 Print_Server  - JetDirect 620n internal print server - 10BaseT and 100BaseTX LAN interface board - Plugs into peripheral EIO slot - Has an RJ-45 connector
RF5-3676-000CN Glass  - Copyboard glass assembly - Mounts in the frame on top of the scanner assembly
J7934-61001 Print_Server  - JetDirect 620n internal print server - 10BaseT and 100BaseTX LAN interface board - Plugs into peripheral EIO slot - Has an RJ-45 connector
J7934-69011 Print_Server  - JetDirect 620n internal print server - 10BaseT and 100BaseTX LAN interface board - Plugs into peripheral EIO slot - Has an RJ-45 connector
J7934-69001 Print_Server  - JetDirect 620N internal print server LAN interface board - 10Base-T and 100Base-TX - Plugs into peripheral EIO slot, has RJ-45 connector. 
J7960A Print_Server  - HP Jetdirect 625n internal ethernet print server - Provides 10BaseT, 100BaseTX, or 1000BaseT interface for products with an EIO port
J7960G Print_Server  - HP Jetdirect 625n internal ethernet print server - Provides 10BaseT, 100BaseTX, or 1000BaseT interface for products with an EIO port
RG5-6272-050CN Cover  - ADF base cover assembly - Includes the large bottom rectangular support cover for the ADF assembly with front and rear tray guides, the ADF intermediate PC board, cables, sensors, and hinges
J7934A Print_Server  - JetDirect 620N internal print server LAN interface board - 10Base-T and 100Base-TX - Plugs into peripheral EIO slot, has RJ-45 connector.
J7934G Print_Server  - HP JetDirect 620n internal print server - 10BaseT and 100BaseTX LAN interface board - Plugs into peripheral EIO slot - Has an RJ-45 connector 
RG5-5663-060CN Roller  - Registration roller assembly
RG5-7780-060CN PC_Board  - DC controller board assembly
Q1887A Memory  - 64MB, 100-pin SDRAM DIMM memory module
Q1887-67901 Memory  - 64MB SDRAM - 100MHz synchronous DRAM - DIMM package
RG5-5728-100CN Power_Supply  - High voltage power supply board
RG5-5728-050CN PC_Board  - High voltage power supply board
5851-2462 Control_Panel  - Control panel assembly - Includes the display and control function buttons - Does NOT include the language specific overlay
C7845-67901 Memory  - 32MB, 100-pin SDRAM DIMM memory module
Q3726-69010 PC_Board  - Formatter PC board assembly - For the LaserJet 9040MFP and 9050MFP versions
Q3726-69007 PC_Board  - Formatter PC board assembly - For the LaserJet 9040MFP and 9050MFP versions
RG5-6235-140CN PC_Board  - Controller PC board
4G1-5219-030CN Flipper  - Flipper (or paper reversing) assembly - First assembly the exiting paper from the printer goes through
C8543X Cartridge  - HP Ultra-Precise print cartridge (Smart print cartridge) - Will print approximately 30,000 pages based on a 5% print density
4G1-5219-080CN Flipper  - Flipper (or paper reversing) assembly - First assembly the exiting paper from the printer goes through
J6073G Hard_Drive  - High performance 20GB hard disk - Plugs in one of the Extended Input/Output (EIO) slots
J6073A Hard_Drive  - High performance 20GB hard disk - Plugs in one of the Extended Input/Output (EIO) slots
RG5-8012-000CN Control_Panel  - Control panel - Includes display
RG5-6208-180CN Paper_Input_Unit  - Paper Input Unit (PIU) - For tray 4
RG5-6208-150CN Feeder  - Paper Input Unit (PIU)Paper pick-up assembly - For paper input tray 4 
RG5-6235-150CN PC_Board  - Controller PC board
Q5693-67921 Flipper  - Flipper assembly - Transports paper from the printer into the 8-bin mailbox assembly and either outputs it directly to the face-up output tray or flips it for transport to one of the face-down trays - Mounts on top of the assembly
J3263A Print_Server  - External JetDirect 300X LAN interface module - Interfaces a parallel printer to an ethernet 10Base-T (RJ-45) or 100Base-TX (RJ-45) LAN
Q3701-60020 PC_Board  - Modem PCA - HP LaserJet analog fax accessory 300
J4135A Print_Server  - JetDirect connectivity card - Has one USB port, one serial (DB9) port, and one LocalTalk port - Plugs in one of the EIO slots on selected DesignJet and LaserJet printers
C8519-69037 Power_Supply  - High voltage power supply board - Mounts on the upper rear of the printer
J7948-61001 Hard_Drive  - ROHS HDD HDI SMO KIT HARD DRIVE
J7948-61021 Hard_Drive  - ROHS HDD HDI SMO KIT HARD DRIVE
J7948-61011 Hard_Drive  - ROHS HDD HDI SMO KIT HARD DRIVE
RG5-5703-060CN Control_Panel  - Control Panel Assembly
RG5-5703-000CN Control_Panel  - Control Panel Assembly
RM1-7793-000CN Control_Panel  - Control Panel Assembly
4G1-5219-000CN Flipper  - Flipper (or paper reversing) assembly - First assembly the exiting paper from the printer goes through
Q3701-60004 PC_Board  - Modem PCA - HP LaserJet analog fax accesory 300
Q3701-60012 PC_Board  - Modem PCA - HP LaserJet analog fax accesory 300 
RG5-5737-000CN Cover  - Right cover assembly - Includes all components attached to this door
RG5-5643-030CN Delivery  - Delivery assembly - Includes the curved plastic structure, various rollers and gears, and the 'L' shaped metal support structure with three fans
RG5-5643-080CN Delivery  - Delivery assembly - Includes the curved plastic structure, various rollers and gears, and the 'L' shaped metal support structure with three fans
RG5-5643-060CN Delivery  - Delivery assembly - Includes the curved plastic structure, various rollers and gears, and the 'L' shaped metal support structure with three fans
RG5-5646-050CN Door  - Left door assembly
RG5-5646-070CN Door  - Left door and diverter assembly
Q5693-60504 Motor  - Transport belt motor (with fan encoder) - Provides the drive to transport paper through the mailbox structure
RG5-5737-090CN Cover  - Right cover assembly - Includes all components attached to this door
RG5-5656-060CN Drive_Assembly  - Drum feed drive assembly
Q5693-60532 Attachment_Assembly  - Attachment assembly kit - Includes the attachment rod with ground wire and plastic sleeve - Secures the 8-bin mailbox assembly to the bottom of the printer
RG5-5656-080CN Drive_Assembly  - Drum feed drive assembly
J4102B Module  - External JetDirect LAN interface module with EtherTwist (10Base-T) connector
C4788-60535 PC_Board  - LED PCA - Control panel LED display
RG5-6250-000CN Power_Supply  - Power supply assembly
J7948-61031 Hard_Drive  - 20GB hard disk drive ROHS
J7948-61003 Hard_Drive  - ROHS HDD HARD DRIVE replacement part is J7948-61031. 
RG5-6250-040CN Power_Supply  - Power supply assembly
RG5-6225-070CN Paper_Path_Module  - Vertical registration assembly
RG5-6225-100CN Paper_Path_Module  - Vertical registration assembly
4G1-5170-040CN Power_Supply  - Power supply assembly - Provides +24VDC for solenoids and motors, and +5VDC for the control PC board and sensors - Includes the metal card cage and attached AC power cord
C8568-67902 Tray  - Optional Tray 1 assembly - Complete Tray 1 assembly including rollers and mechanical drives
RG5-5635-080CN Tray  - 500-sheet paper input tray assembly
C8085-60553 Sensor  - Optical sensor kit - Contains the optical sensors that sense the location of the stacking tray/top of paper stack.
RG5-6259-040CN Sensor  - Sensor assembly - Includes the support plate, number 3 document size sensor (PS4) and cable assembly - Mounts in the bottom of the scanner assembly toward the middle
C8085-60524 Sensor  - Optical sensor kit - Contains the optical sensors that sense the location of the stacking tray/top of paper stack.
4G1-4986-000CN Bin  - Booklet bin - Output tray that holds stapled and folded booklets
C8085-60517 Cable  - Jet-link cable and power cord assembly
C8519-69015 Power_Supply  - High Voltage power supply board - Mounts on the upper rear of the printer
Q5693-60508 Guide  - Paper guide (nose piece) - Input paper guide to the mailbox assembly - Inserts into the output slot of the printer
Q9121A Memory  - 128MB, 100-pin SDRAM DIMM memory module Synchronous DRAM DIMM 
Q2626-67951 Memory  - 128MB, 100-pin, DDR SDRAM DIMM memory module
RH7-1622-000CN Motor  - Fuser delivery motor (24 VDC) - Provides power for fuser delivery drive assembly
RH7-1656-000CN Motor  - Drum feed drive motor
RF5-3695-030CN Cover  - Whiteboard cover assembly - White padded sheet mounted on a rectangular support cover - Mounts on the under side of the ADF assembly/scanner lid
Q7718-67951 Memory  - 128MB, 100-pin, DDR SDRAM DIMM memory module
Q2626A Memory  - HP 128MB 100 Pin DDR DIMM - Used to add flash memory-based accessory fonts, macros, and patterns
Q7709A Memory  - 133 MHz 128MB, 100-pin SDRAM DIMM memory module Synchronous DRAM DIMM
Q7709AX Memory  - 133 MHz 128MB, 100-pin SDRAM DIMM memory module Synchronous DRAM DIMM
C9121A Memory  - 128MB, 100-pin SDRAM DIMM memory module
RG5-5635-110CN Tray  - 500-sheet paper cassette - Paper cassette used for tray 2 and tray 3
4G1-4986-020CN Bin  - Booklet bin - Output tray that holds stapled and folded booklets
RG5-7789-050CN Drive_Assembly  - Fuser delivery drive assembly - Includes gears, motor and microswitch for fuser drive - Also drives delivery roller
Q2627-67951 Memory  - HP 256MB 100 Pin DDR DIMM - Used to add flash memory-based accessory fonts, macros, and patterns
C8085-60504 Cover  - Rear cover of 3000 sheet output device
J4169A Print_Server  - JetDirect 610N internal print server (10Base-T and 100Base-TX) LAN interface board - Plugs into peripheral EIO slot - Has a RJ-45 connector.
RG5-7789-000CN Drive_Assembly  - Fuser delivery drive assembly - Includes gears, motor and microswitch for fuser drive - Also drives delivery roller
Q3650-60001 PC_Board  - Copy connect board assembly - LVDS adapter board used to interface the flatbed scanner to the copy processor board in the printer - Mounts on the rear of the flatbed scanner assembly
Q5693-60510 Cover  - Rear cover assembly - Includes the large rectangular cover, bubbled cover, channel cover, interface cable, cable adapter, and power cord
RG5-5719-000CN PC_Board  - Memory controller PC Board
RG5-5647-070CN Delivery  - Face-up delivery assembly
RG5-5647-050CN Delivery  - Face-up delivery assembly
RH7-1487-000CN Motor  - 24VDC motor assembly - Drives the output delivery rollers - Mounts in a bracket about in the center of the rear frame of the ADF paper pickup assembly
RH7-1488-000CN Motor  - 24VDC motor assembly - Drives the paper pickup roller, feed roller, separation belt assembly, and registration rollers - Mounts at an angle in a bracket on the rear frame of the ADF paper pickup assembly
C4785-60502 Bin  - Face-down paper output bin - Smaller of the two types of trays
RG5-6258-000CN Sensor  - Sensor crossmember assembly - Includes the Black plastic housing, document sensor (PS1), number 1 and 2 document size sensors (PS2 and PS3), home position detector sensor (PS5), and cable assembly - Mounts in the bottom right of the scanner assembly
RH7-5287-000CN Motor  - Drum feed drive motor
RH7-1485-000CN Motor  - 24VDC scanner stepper motor - Provides the drive to move the scanner optical assembly back and forth - Mounts in the right rear of the scanner assembly
Q7707AX Memory  - 32MB, 100-pin SDRAM DIMM memory module
RG5-7896-000CN PC_Board  - Paper pickup board
C7845A Memory  - 32MB, 100-pin SDRAM DIMM memory module
Q5693-60516 Magnet  - Magnetic latch assembly - Helps to hold the top of the 8-bin mailbox assembly firmly against the printer - Mounts on the upper right corners of the mailbox structure (two used)
C8085-60511 Caster  - Swivel caster with height adjustable starwheel
4G1-5171-000CN Bin  - Stacker output bin - Job stacker and upper output tray for the multifunction finisher assembly
C8085-60507 Cover  - Stapler controller PC board cover - Includes label
RG5-5719-100CN PC_Board  - Memory controller PC Board - Toner cartridge
RG5-5702-000CN Cover  - Front cover assembly - Large door above trays 2 and 3
RH7-5288-000CN Motor  - Fuser delivery motor - 24VDC
RG5-5741-020CN Lifter  - Cartridge lifter assembly
RH7-1488-030CN Motor  - Motor (24 VDC) assembly - Drives the paper pickup roller, feed roller, separation belt assembly, and registration rollers - Mounts at an angle in a bracket on the rear frame of the ADF paper pickup assembly
RH7-1487-020CN Motor  - Motor (24 VDC) assembly - Drives the output delivery rollers - Mounts in a bracket about in the center of the rear frame of the ADF paper pickup assembly
RG5-5645-020CN Delivery  - Delivery cross member assembly - Includes the 'L' shaped support bracket with the rear delivery fan (Fan 3), front delivery fan (Fan 4), and face down tray fan (Fan 6)
RG5-6318-000CN Fan  - 24VDC cooling fan assembly - Includes fan, filter and metal grill - Mounts on the rear support frame in the left rear corner of the scanner assembly
5851-1828 Cable  - Hard drive cable assembly - 360mm long
C8085-60505 Cover  - Front cover of 3000 sheet stacker
C4293A Memory  - 8MB simplified Chinese MROM DIMM - For LaserJet printers
C7843A Memory  - 16MB, 100-pin SDRAM DIMM memory module
C4788-60513 Bin  - Stapler bin - Lower tray that holds stapled print jobs
Q7715A Memory  - HP 64MB 100-Pin DDR DIMM
Q7715AX Memory  - 64MB DDR DIMM
4G1-4984-000CN Cover  - Rear cover assembly - Includes the rear cover shell with support leg cover
RG5-6318-030CN Fan  - 24VDC cooling fan assembly - Includes fan, filter and metal grill - Mounts on the rear support frame in the left rear corner of the scanner assembly
C3764-60507 Motor  - Elevator stepper motor - Moves the delivery head assembly into position
Q6006-60001 PC_Board  - Copy connect board assembly - LVDS adapter board used to interface the flatbed scanner to the copy processor board in the printer - Mounts on the rear of the flatbed scanner assembly
Q7707-67951 Memory  - 32MB, 100-pin SDRAM DIMM memory module
C8085-60506 Door  - Stapler/stacker access door
4H1-6582-000CN Cable  - Jet link interface cable assembly - Includes the coiled cable with the printer interface connector on one end and PC board connector on the other
Q5693-60526 Motor  - Transport belt motor (with fan encoder) - Provides the drive to transport paper through the mailbox structure
C8085-60561 Caster  - Swivel caster with height adjustable starwheel
C7843-67901 Memory  - 16MB, 100-pin SDRAM DIMM memory module
C8085-60540 Latch  - Latching mechanism - Attaches to left side of printer to secure stacker/stapler to printer
Q5693-60511 PC_Board  - LED display board (three LEDs) - Includes the diagnostic LED board and cable assembly -
C4788-60512 Bin  - Face up bin - Top paper tray
RG5-6312-000CN Fan  - ADF cooling fan assembly - Includes the fan assembly, fan housing, and interconnecting cable - Mounts on the left rear of the ADF base assembly
RG5-6281-000CN Roller  - Feed roller assembly - Includes a steel shaft with five rubber rollers, two bushings, a spring, and 'E' clips - Mounts to the left of the paper pickup roller in the bottom of the ADF paper pickup assembly
RG5-6274-000CN Sensor  - ADF media width sensor assembly (includes the white sensor gear that mates with the rack gear) - Works with the front and rear width guides - Mounts on the bottom center of the ADF base assembly (behind the copyboard cover assembly)
RG5-5809-060CN Tray  - Multi-purpose Tray - Optional Tray 1 drop down paper input tray assembly only - Includes drop down flip out tray and paper width guides
C4788-60510 PC_Board  - LED PCA - Control panel LED display
RG5-7806-000CN Sensor  - Sensor assembly - Includes the support plate, number 3 document size sensor (PS4) and cable assembly - Mounts in the bottom of the scanner assembly toward the middle
RG5-5702-050CN Cover  - Front cover assembly - Large door above trays 2 and 3
C8091A Cartridge  - Replacement staple cartridge - Contains 5000 staples
C8085-60541 Cartridge  - Staple cartridge - Contains 5000 staples - For the add-on staple/stacker unit
C8092A Cartridge  - Replacement staple cartridge assembly - Holds 5000 staples
Q5693-60512 PC_Board  - LED display board (one LED) - Includes the user LED board and cable assembly - Mounts on the upper left of the support structure on the front of the 8-bin mailbox assembly
4G1-5171-040CN Bin  - Stacker output bin - Job stacker and upper output tray for the multifunction finisher assembly
RG5-6315-000CN Cover  - Rear ADF cover assembly - Includes the rear ADF electronics cover and the two hinge covers
RG5-8009-000CN PC_Board  - Cartridge memory controller board - Between ECU and the toner cartridge memory antenna
Q5693-60531 Motor  - Elevator stepper motor - Moves the delivery head assembly into position
RG5-6228-060CN Drive_Assembly  - Feed drive assembly - Includes the drive motor (M303), support bracket, and the four drive gears - Mounts in the 2,000-sheet paper feeder assembly
RG5-7806-030CN Sensor  - Sensor assembly - Includes the support plate, number 3 document size sensor (PS4) and cable assembly - Mounts in the bottom of the scanner assembly toward the middle
RG5-5662-050CN Transfer_Assembly  - Transfer roller assembly - Includes both transfer guides and transfer roller
RG5-6228-040CN Drive_Assembly  - 2000-sheet feeder drive assembly
Q5693-60509 Cover  - Front cover assembly - Large rectangular with a cutout for the LED display - Mounts on the front of the 8-bin mailbox assembly
C8085-60510 Wing  - Wing kit - Output accumulator wing replacement
RH7-5302-000CN Fan  - Tubeaxial fan
RH7-1661-000CN Fan  - Tubeaxial fan
C4779-60505 Bin  - Stacker bin - Face down lower accumulator tray
C8088-60541 Cartridge  - Replacement staple cartridge assembly - Holds 5000 staples - For the Multifunction finisher assembly
RG5-5662-000CN Transfer_Assembly  - Transfer roller assembly - Includes transfer guides and transfer roller
RG5-5729-000CN Fan  - Tubeaxial fan
Q5693-60507 Cable  - Cable kit - Includes the delivery head motor, flipper sensor cntlr, flipper encoder cntlr, flipper motor cntlr, belt motor encoder, and ESD cables plus the bracket grounding cable assy, delivery head assy flat cable and interlock switch
Q5693-60517 Cover  - Top cover assembly - Slightly curved rectangular piece - Mounts on top of the 8-bin mailbox assembly
Q3982-67951 Memory  - HP 32MB 100 Pin DDR DIMM - Used to add flash memory-based accessory fonts, macros, and patterns
RG5-6258-040CN Sensor  - Sensor crossmember assembly - Includes the Black plastic housing, document sensor (PS1), number 1 and 2 document size sensors (PS2 and PS3), home position detector sensor (PS5), and cable assembly - Mounts in the bottom right of the scanner assembly
Q5693-60527 Guide  - Paper guide (nose piece) - Input paper guide to the mailbox assembly - Inserts into the output slot of the printer
Q2625-67951 Memory  - HP 64MB 100-pin DDR DIMM - Used to add flash memory-based accessory fonts, macros, and patterns
Q2625A Memory  - HP 64MB 100 Pin DDR DIMM - Used to add flash memory-based accessory fonts, macros, and patterns
RG5-6281-020CN Roller  - Feed roller assembly - Includes a steel shaft with five rubber rollers, two bushings, a spring, and 'E' clips - Mounts to the left of the paper pickup roller in the bottom of the ADF paper pickup assembly
Q7713-67951 Memory  - HP 32MB 100 Pin DDR DIMM - Used to add flash memory-based accessory fonts, macros, and patterns
C4788-60515 Caster  - Stationary caster - Fixed position caster
RG5-6312-030CN Fan  - ADF cooling fan assembly - Includes the fan assembly, fan housing, and interconnecting cable - Mounts on the left rear of the ADF base assembly
RG5-6227-000CN Paper_Path_Module  - Paper path connection assembly - Directs paper from the high capacity input assembly output to the vertical input path on the print engine
RG5-6227-040CN Paper_Path_Module  - Paper path connection assembly - Directs paper from the high capacity input assembly output to the vertical input path on the print engine
RG5-5724-050CN Holder  - Fuser connector holder assembly
RG5-6313-000CN Guide  - Upper and lower rear cable guides (I/F 2 and 3) - Two of six pieces that form the pivioting cable guide from the ADF assembly to the scanner assembly - Mounts on the left rear of the ADF assembly
RB2-8040-000CN Cover  - Top cover assembly - 'U' shaped plastic cover - Covers the top of the scanner in the ADF assembly - Mounts on the left end of the ADF assembly
RG5-5741-040CN Lifter  - Cartridge lifter assembly
4H1-1080-000CN Cable  - Jet link interface cable assembly - Includes the coiled cable with the printer interface connector on one end and PC board connector on the other
RH7-1486-000CN Fan  - ADF cooling fan (ONLY) - Mounts on the left rear of the ADF base assembly
RF5-3319-000CN Roller  - Transfer roller - Includes the long black spongy roller, roller shaft, and drive gear - Transfers static charge to the paper
RG5-5701-000CN Cover  - Rear cover assembly
C3764-60505 Bin  - Face-up paper output bin
C8085-60516 Cover  - Foot cover
RG5-6283-020CN Roller  - Pickup roller assembly - Includes a steel shaft with a rubber 'D' shaped roller, drive gear, bushings, sesnor flag, and two retaining clips - Mounts in the bottom of the ADF paper pickup assembly
RG5-6996-000CN PC_Board  - Cartridge memory controller board - Between ECU and the toner cartridge memory antenna
RH7-5294-000CN Fan  - Tubeaxial fan
RH7-1657-000CN Fan  - Tubeaxial fan (fan 1) - Provides air to the power supply
RH5-3078-030CN PC_Board  - ADF intermediate PC board - Has for cable connectors (J701, J702, J703, and J704) plus the ADF close angle detection sensor - Mounts on top of the ADF base assembly towards the center rear
RG5-5651-030CN Guide  - Transfer guide assembly (Ribbed plastic piece) - Has slot for the transfer roller assembly
RG5-5651-000CN Guide  - Transfer guide assembly (Ribbed plastic piece) - Has slot for the transfer roller assembly
RG5-5722-000CN Cable  - Main cable harness and holder assembly
RB2-7648-040CN Cover  - Front cover for the 2,000-sheet paper feeder assembly
RG5-5722-030CN Cable  - Main cable harness and holder assembly
Q7725-67969 Firmware  - Laserjet 9040/9050 MFP firmware memory - Version 08.071.9
RG5-6277-000CN Roller  - Lower registration roller assembly - Includes a steel shaft with four gray rollers and a drive gear - Mounts in the lower center of the ADF paper pickup assembly
RG5-6238-000CN PC_Board  - Paper size PC board
RF5-3644-000CN Cover  - Rear center cover for the 2,000-sheet paper feeder assembly
RH5-3073-000CN PC_Board  - Flatbed intermediate PC Board - Intermediate Board between the scanner control board (J502) and the flatbed analog processor board (J501) - Mounts in the bottom of the scanner housing (below the copyboard glass)
RH5-3078-000CN PC_Board  - ADF intermediate PC board - Has for cable connectors (J701, J702, J703, and J704) plus the ADF close angle detection sensor - Mounts on top of the ADF base assemby towards the center rear
RG5-6283-000CN Roller  - Pickup roller assembly - Includes a steel shaft with a rubber 'D' shaped roller, drive gear, bushings, sesnor flag, and two retaining clips - Mounts in the bottom of the ADF paper pickup assembly
RH5-3073-030CN PC_Board  - Flatbed intermediate PC Board - Intermediate Board between the scanner control board (J502) and the flatbed analog processor board (J501) - Mounts in the bottom of the scanner housing (below the copyboard glass)
RG5-5678-000CN PC_Board  - Paper pickup board
Q5693-60528 PC_Board  - LED display board (three LEDs) - Includes the diagnostic LED board and cable assembly -
RG5-5771-000CN Cable  - Cable assembly
RB3-0304-040CN Caster  - Front swivel caster - Mounts on the bottom frame of the 2,000-sheet paper feeder assembly (two used)
RG5-5724-020CN Holder  - Fuser connector holder assembly
C4788-60514 Interlock  - Interlock switch - Senses when stacker/stapler is correctly attached to printer
4F1-2090-000CN Cover  - Foot cover - Plastic panel that covers the bottom support arms and casters
C8084-60501 Cover  - Stacker controller PC board cover - Includes label
RF5-3645-000CN Cover  - Left cover for the 2,000-sheet paper feeder assembly
RH5-3079-000CN PC_Board  - ADF sensor PC board assembly - Narrow strip PC board with the two document skew sensors, registration sensor, and timing sensor - Mounts on top of the registration guide assembly in the ADF main assembly
RG5-5727-030CN Receptacle  - A/C power input receptacle module and power switch
FH7-7423-000CN Sensor  - Media length sensor - Three optical sensors (PS1, PS2, and PS3) used to sense the document and the length of the media being scanned on the flatbed scanner
RG5-5727-000CN Receptacle  - A/C power input receptacle module and power switch
4G1-4983-000CN Cover  - Front cover assembly - Includes the front cover panel with support leg cover and the stapler access door assembly
4G1-4988-000CN Latch  - Attachment latch assembly - Includes the latch plate and two captive thumb screws - Used to secure the stacker or multifunction finisher to the printer
RB2-7934-000CN Cover  - Upper front cover - Top of the protrusion that makes up the control panel housing - Mounts to the front of the scanner assembly
RG5-6306-000CN Flag  - Timing flag and sensor holder assembly - Activates the two document skew detection sensors and the timing detection sensor on the sensor board on top of the registration guide assembly in the ADF main assembly (three used)
Q7718AX Memory  - 128MB DDR DIMM
4G1-5252-000CN Rod  - Attachment rod assembly - Includes the mounting bracket, attachment rod and the slide on plastic latch - Aligns the stacker or multifunction finisher to the printer
RH7-5312-000CN Solenoid  - 24VDC solenoid assembly - Activates the paper feed shutter assembly - Mounts on the rear frame of the ADF paper pickup assembly towards the right
RG5-6266-000CN Roller  - Lower delivery roller assembly - Includes the support bracket, shaft, and four rollers - Moves scanned documents from the ADF assembly into the output tray - Mounts on the left end of the scanner assembly
RG5-6316-000CN Tray  - ADF paper output tray - Includes the tray with pull-out extension - Receives scanned pages from the ADF assembly - Mounts on the left side of the ADF/scanner assembly
Q5693-60529 PC_Board  - LED display board (one LED) - Includes the user LED board and cable assembly - Mounts on the upper left of the support structure on the front of the 8-bin mailbox assembly
RG5-6311-000CN Guide  - Cable guide assembly - Black plastic channel/cover - Mounts on the rear of the ADF main assembly
RG5-5721-000CN Cover  - Front inside cover - Cover behind front drop down cover
C4779-60502 Door  - Stacker door assembly with label
RG5-8025-000CN Cable  - Cable assembly - Fuser power cable
C4103A Wireless_PC_Board  - HP Fast Infrared Connect pod (FIR) - Allows wireless printing from any IRDA-compliant PC
RB2-7933-000CN Cover  - Lower front cover - Bottom of the protrusion that makes up the control panel housing - Mounts to the front of the scanner assembly
RB2-6007-000CN Door  - Left side door - Left cover that diverter assembly attaches to
RB2-7649-000CN Cover  - Right cover for the 2,000-sheet paper feeder assembly
RG5-6207-060CN Sensor  - Paper size sensing assembly
RG5-7787-000CN Cable  - Upper cable guide assembly - Includes the two upper cables and support bracket - Mounts in the top of the printer 
RG5-6207-040CN Sensor  - Paper size sensing assembly
RB2-5690-000CN Tray  - Face up paper output tray
RH7-1623-000CN Fan  - Controller board tubeaxial fan
RH5-3079-030CN PC_Board  - ADF sensor PC board assembly - Narrow strip PC board with the two document skew sensors, registration sensor, and timing sensor - Mounts on top of the registration guide assembly in the ADF main assembly
RG5-5653-000CN Holder  - Transfer roller holder assembly - Includes the base structure, latch, anti-static brush, pressure springs, bushings, and contact springs - Assembly that the transfer roller mounts in
RG5-6304-000CN Roller  - Upper registration roller guide assembly - Includes the steel shaft with four White rollers mounted in a support frame - Mounts in the lower center of the ADF main assembly
C8085-60512 Hardware  - Screw kit - Includes all screws used on Stapler/Stacker and 3000 Sheet Stacker
Q5693-90002 Manual  - Combined service manual for the Q5693A 8-bin mailbox assembly, C8084A 3,000-sheet output stacker assembly, C8085A 3,000-sheet output stacker/stapler assembly, and C8088B multifunction finisher assembly
RG5-5740-000CN Latch  - Right cover latch handle assembly
RH7-1481-020CN Motor  - Deck drive motor (M303) only - Mounts in the 2,000-sheet paper feeder assembly
C4785-60511 Caster  - Fixed caster - Adjustable height caster
RH7-1659-000CN Fan  - Tubeaxial fan
RH7-5297-000CN Fan  - Tubeaxial fan
RG5-6305-000CN Flag  - Registration flag and sensor holder assembly - Activates the document registration sensor on the sensor board on top of the registration guide assembly in the ADF main assembly
8120-6814 Power_Cord  - Power cord (Flint Gray) - 17 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (for 220V in Denmark)
4G1-5175-000CN Caster  - Adjustable caster - Adjustable height/leveling caster
C8085-60520 Cover  - Bubbled cover - Half-domed shaped cover - Covers the inlet for the power cord and interface cable
RG5-5654-000CN Guide  - Transfer roller guide - Mounts to the top of the base structure of the transfer roller assembly
RG5-6266-030CN Roller  - Lower delivery roller assembly - Includes the support bracket, shaft, and four rollers - Moves scanned documents from the ADF assembly into the output tray - Mounts on the left end of the scanner assembly
RG5-6285-000CN Sensor  - Photo-sensor assembly - Includes the sensor and mounting bracket - Paper pickup roller home position sensor - Activated by the sensor flag on the pickup roller assembly - Mounts on the front frame of the ADF paper pickup assembly
RF5-3689-000CN Flapper  - Rear flapper arm - Part of the paper separation mechanism for the paper pickup assembly - Mounts just in front of the rear separation belts in the ADF assembly
RG5-6238-020CN PC_Board  - Paper size PC board
RH2-5456-000CN Cable  - Ribbon cable - Connects between the ADF analog processor board (J301) in the ADF assembly and the scanner control board (J102) in the flatbed scanner assembly
Q3726-60120 Overlay  - Control panel overlay kit - Includes the 'Ready', 'Data', 'Attention' LEDs left side overlay, and the 'Reset', 'Stop', 'Start' buttons right side overlay (Traditional Chinese)
Q3726-60121 Overlay  - Control panel overlay kit - Includes the 'Ready', 'Data', 'Attention' LEDs left side overlay, and the 'Reset', 'Stop', 'Start' buttons right side overlay (Simplified Chinese)
Q3726-60122 Overlay  - Control panel overlay kit - Includes the 'Ready', 'Data', 'Attention' LEDs left side overlay, and the 'Reset', 'Stop', 'Start' buttons right side overlay (Korean)
RG5-5746-000CN Lever  - Cartridge release lever assembly
RG5-6298-000CN Weight  - Weight plate assembly - Solenoid activated plate assembly that drops down during the paper pickup process and pushes against the paper stack on the pickup rollers - Mounts in the ADF paper pickup assembly
RB2-7961-000CN Roller  - Paper pickup roller (Only) - Rubber 'D' shaped roller - Mounts on the paper pickup drive shaft in the bottom of the ADF paper pickup assembly
C8085-60535 Guide  - Guide Bar Kit - Grey plastic piece with four curved fingers to guide paper - Kit includes accumulator, two screws and instructions
C8085-60515 Cable  - Flipper and paper path ribbon cable
C4785-60524 Tape  - Metallic tape and housing assembly - Guides and holds the paper against the transport belt (Wide tape version used with the single belt transport belt system)
C4785-60526 Roller  - Flipper assembly roller kit - Includes six Black rubber rollers
Q5693-60514 Plastics_Kit  - Plastics kit - Includes 8 small and 12 normal size white plastic spacers, 3 flat cable holders, cable edge piece, 2 anticurl strings (fish wire), 2 anticurl springs, 2 bottom small pulleys with snaps, and 2 upper small pulleys with snaps
RB2-7988-000CN Belt  - Separation belt - Gray rubber belt between the separation drive shaft and the stationary shaft - Mounts towards the entrance of the ADF paper pickup assembly (four used)
RG5-5700-000CN Knob  - Fuser jam removal knob
RB2-5682-000CN Cover  - Lower right front corner cover for tray 2 and 3
RF5-3689-020CN Flapper  - Rear flapper arm - Part of the paper separation mechanism for the paper pickup assembly - Mounts just in front of the rear separation belts in the ADF assembly
RF5-3688-000CN Flapper  - Front flapper arm - Part of the paper separation mechanism for the paper pickup assembly - Mounts just in front of the front separation belts in the ADF assembly
Q5693-60518 Channel  - Cable cover channel - 'U' shaped channel that covers the interface cable and power cord
RB3-0304-050CN Caster  - Front swivel caster - Mounts on the bottom frame of the 2,000-sheet paper feeder assembly (two used)
C8085-60523 Plastics_Kit  - "Stapler plastic parts kit - Includes cable holders, stapler door hinges and safety switch cover"
RH7-1658-000CN Fan  - Tubeaxial fan (fan 4) - Mounts on the upper left crossmember on the delivery assembly
4G1-5174-000CN Caster  - Stationary caster - Non-adjustable caster - Mounts on the bottom front right of the multifunction finisher
RG5-5705-000CN Cover  - Left upper cover - Small cover above left door
RG5-5705-030CN Cover  - Left upper cover - Small cover above left door
RF5-3688-020CN Flapper  - Front flapper arm - Part of the paper separation mechanism for the paper pickup assembly - Mounts just in front of the front separation belts in the ADF assembly
4G1-4008-000CN Sensor  - Door switch assembly - Includes the stapling door 'open' sensor microswitch assembly, two photosensors, sensor flags, and support structure
RB2-7678-030CN Caster  - Stationary rear caster - Mounts on the bottom frame of the 2,000-sheet paper feeder assembly (two used)
RG5-6313-030CN Guide  - Upper and lower rear cable guides (I/F 2 and 3) - Two of six pieces that form the pivioting cable guide from the ADF assembly to the scanner assembly - Mounts on the left rear of the ADF assembly
RH7-1486-020CN Fan  - ADF cooling fan (ONLY) - Mounts on the left rear of the ADF base assembly
RH7-5312-020CN Solenoid  - solenoid (24 VDC) assembly - Activates the paper feed shutter assembly - Mounts on the rear frame of the ADF paper pickup assembly towards the right
RG5-6229-030CN Sensor  - Paper volume sensing assembly
RB2-5684-000CN Cover  - Right rear cover - small cover strip on rear side of right cover assembly
4G1-5252-040CN Rod  - Attachment rod assembly - Includes the mounting bracket, attachment rod and the slide on plastic latch - Aligns the stacker or multifunction finisher to the printer
RG5-5715-000CN Rail  - Right rail assembly
4G1-5164-000CN Door  - Upper panel (or top door) assembly - Rectangular cover with molded-in hinge pins - Mounts on top of the multifunction finisher assembly
RG5-6304-040CN Roller  - Upper registration roller guide assembly - Includes the steel shaft with four White rollers mounted in a support frame - Mounts in the lower center of the ADF main assembly
C8085-60528 Guide  - Alignment Rod Guide kit - Blue plastic slider on alignment rod - Snaps into bottom of printer to locate alignment rod - Also includes metal ground contact piece between guide bar and printer chassis - Does not include rod
RG5-8034-000CN Cable  - Fuser Assembly high voltage cable and connectors
C2950A Cable  - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 2.0m (6.6ft) long
RB2-7678-020CN Caster  - Stationary rear caster - Mounts on the bottom frame of the 2,000-sheet paper feeder assembly (two used)
RG5-5700-030CN Knob  - Fuser jam removal knob
FH7-7423-020CN Other_Parts  - SENSOR, DOCUMENT SIZE
RG5-5740-020CN Latch  - Right cover latch handle assembly
RG5-6289-020CN Solenoid  - Solenoid (24 VDC) assembly - Includes the solenoid and lever arm
Q5693-60520 Cover  - Blind cover assembly - 'U' shaped cover - Mounts between the face-up output tray and the upper-most face-down output tray - Slides in and secures in the side retaining notches on the 8-bin mailbox assembly
4G1-5167-020CN Sensor  - Booklet bin 'full' sensor flag assembly - Semi triangular shaped arm with small rollers - Detects when the booklet bin has reached capacity
RB2-8016-000CN Shaft  - Latching shaft - Long square shaft with a latching hook at one end - Used with the free release latch and release handle to secures the ADF main assembly when the unit is in the operating position
RF5-3644-020CN Cover  - Rear center cover for the 2,000-sheet paper feeder assembly
4G1-5174-020CN Caster  - Stationary caster - Non-adjustable caster - Mounts on the bottom front right of the multifunction finisher
RB2-8054-000CN Cover  - Left side cover - Serves as the mounting bracket for the ADF paper output tray - Mounts on the upper left side of the scanner assembly
C4788-60517 Switch  - Safety switch assembly - Stapler door safety lock-out switch
RG5-5653-030CN Holder  - Transfer roller holder assembly - Includes the base structure, latch, anti-static brush, pressure springs, bushings, and contact springs - Assembly that the transfer roller mounts in
RG5-5713-000CN Rail  - Left upper rail assembly
RB2-7652-000CN Cover  - Top cover for the 2,000-sheet paper feeder assembly
RF5-3674-000CN Cover  - Roller cover - Covers the exit delivery roller on the left side of the scanner assembly
RB2-5687-000CN Cover  - Lower left cover - Smaller plastic piece below left door and diverter assembly
RG5-6289-000CN Solenoid  - 24VDC solenoid assembly - Includes the solenoid and lever arm
RG5-5715-030CN Rail  - Right rail assembly
RG5-5704-040CN Latch  - Latch mount assembly
RG5-6229-040CN Sensor  - Paper volume sensing assembly
C4788-60527 Clip  - Paper stopper clip kit - Both clips that mount below the wings on paper output accumulator
RB2-8048-000CN Cover  - ADF assembly front cover - Mounts on the end of the ADF main assembly structure
RB2-8015-000CN Handle  - Release handle - Used to open the ADF main assembly from the paper pickup assembly to clear paper jams - Slides on the latching shaft in the top left center of the ADF main assembly
RB2-7884-000CN Roller  - Lower ADF delivery roller - Mounts on a short shaft at the left end of the scanner assembly (four used - two per shaft)
RG5-6206-030CN Switch  - Switch assembly - Custom/standard paper switch
RG5-6306-020CN Flag  - Timing flag and sensor holder assembly - Activates the two document skew detection sensors and the timing detection sensor on the sensor board on top of the registration guide assembly in the ADF main assembly (three used)
RG5-6240-000CN Cable  - Jetlink connector socket and cable
RB2-5759-000CN Torque_Limiter  - Torque limiter
RB2-7650-000CN Cover  - Right rear cover for the 2,000-sheet paper feeder assembly
RG5-5648-020CN Damper  - Left door damper assembly
RB2-7709-000CN Caster  - Caster
RG5-5811-040CN Cover  - Service cover assembly - Cover for pickup and separation rollers
WG8-5624-000CN Sensor  - Replacement for part WG8-5362-000CN ORDER WG8-5624-000CN PHOTO-INTERRUPTER TLP1241 Photo-sensor (TLP1241) - Sensor flag activated 
WG8-5362-000CN Shaft  - Photo-sensor (TLP1241) - Sensor flag activated.
4G1-5221-020CN Switch  - Interlock switch - Includes plastic holder and metallic activation flag - Senses when the multifunction finisher is not attached to printer
C8084-60505 Plastics_Kit  - Stacker plastic kit - Includes cable holders, stapler door hinges, and safety switch cover
RB2-5685-000CN Cover  - Left back cover - Narrow strip covering the left rear corner of the printer
C4785-60510 Caster  - Fixed caster - Non-adjustable height caster
RG5-5706-000CN Cover  - Left upper cover assembly - Small rectangular cover that mounts between the top of the printer and the paper output tray
RG5-5717-020CN Contact  - Toner cartridge contact assembly
4G1-5221-000CN Switch  - Interlock switch - Includes plastic holder and metallic activation flag - Senses when the multifunction finisher is not attached to printer
RG5-6317-000CN Hinge  - Hinge cover assembly - Flexible hinge with four divisions - Mounts on the rear between the ADF assembly and the scanner assembly (two used)
4G1-5175-020CN Caster  - Adjustable caster - Adjustable height/leveling caster
RG5-5779-030CN Connector  - Jetlink connector - Connector between Tray 4 and printer engine
RG5-5763-000CN Cable  - Cable assembly
RG5-5746-030CN Lever  - Cartridge release lever assembly
RB2-7651-000CN Cover  - Left rear cover for the 2,000-sheet paper feeder assembly
RB2-8063-000CN Cover  - Right side cover - 'L' shaped rectangular cover for the right end of the scanner assembly
4A1-7427-000CN Brush  - Anti-static brush assembly - Includes the mounting plate with the anti-static brush mouted to it
4G1-5172-000CN Door  - Stapler access door - Rectangular door at the top of the front cover assembly - Provids access to the stapler, folding jam knob, and product release handle
RG5-5714-020CN Rail  - Left lower rail assembly
RB2-5653-000CN Strap  - Restraining strap
RG5-5699-040CN Sensor  - End paper sensor assembly - Contains Tray 2 and 3 paper length detection switches
RF5-3404-000CN Roller  - Separation roller - For tray 1 assembly
5063-1256 Cable  - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 2.0m (6.6ft) long
RG5-5717-000CN Contact  - Toner cartridge contact assembly
8121-0780 Power_Cord  - Power cord (Flint Gray) - 17 AWG, 2.3m (7.5ft) long - Has straight (F) C13 receptacle (For 240V in India)
RG5-6257-000CN Cable  - Scanner controller ribbon cables (two cable set) - Interconnects the flatbed intermediate PC board (J504 and 502) to the scanner control PC board (J103 and J105) - Mounts towards the front of the scanner assembly
RB2-5676-000CN Cover  - Tray 1 blanking cover
RG5-5699-000CN Sensor  - End paper sensor assembly - Contains Tray 2 and 3 paper length detection switches
RG5-5713-020CN Rail  - Left upper rail assembly
RG5-6240-020CN Cable  - Jetlink connector socket and cable
RG5-8013-000CN PC_Board  - Delivery assembly PC board
4A1-7519-000CN Cover  - Internal paper path cover (dispose roller assembly cover) - Mounts under the upper panel (top door) toward the stacker bin
RG5-5725-030CN Cable  - Fan control cable - Includes cable and holder - On back of printer routes cable around DC controller PC board
RG5-6286-000CN Shutter  - Shutter assembly - Long Black plastic shaft with two curved finger-like tangs - Acts as a paper stop and helps align paper entering the ADF assembly - Mounts just to the right of the paper pickup roller in the ADF paper pickup assembly
4G1-4008-020CN Sensor  - Door switch assembly - Includes the stapling door 'open' sensor microswitch assembly, two photosensors, sensor flags, and support structure
RB2-5683-000CN Cover  - Lower left front corner cover for tray 2 and 3 - Includes power button
RG5-6206-020CN Switch  - Switch assembly - Custom/standard paper switch
4G1-5167-000CN Sensor  - Booklet bin 'full' sensor flag assembly - Semi triangular shaped arm with small rollers - Detects when the booklet bin has reached capacity
4H1-6580-020CN LED  - User LED PC board - Small status indicator LED board - Mounts in the upper left corner of the front frame on the multifunction finisher assembly
RG5-6237-000CN PC_Board  - Paper volume sensor board
RB2-7709-020CN Caster  - Caster
WC4-5136-000CN Switch  - Black toner cartridge switch - Detects when black cartridge is in correct position
RG5-5648-000CN Damper  - Left door damper assembly
RB2-5689-000CN Cover  - Lower right cover - Small plastic piece below right door assembly
RG5-6285-020CN Sensor  - Photo-sensor assembly - Includes the sensor and mounting bracket - Paper pickup roller home position sensor - Activated by the sensor flag on the pickup roller assembly - Mounts on the front frame of the ADF paper pickup assembly
RB2-5528-000CN Link  - Connector link - Door ajar flag
RG5-6290-000CN Flag  - Sensor flag - Sensor activator half of the sensor flag for detecting when the ADF input tray is empty - Flag part passes through the 'empty tray' photo-sensor
4H1-6577-000CN LED  - Service LED PC board - Small board with three LEDs - Used for troubleshooting jams and/or failures
Q5693-60515 Hardware  - Hardware kit - Includes all screws and washers used in the 8-bin mailbox assembly
RG5-5779-000CN Connector  - Jetlink connector - Connector between Tray 4 and printer engine
RG5-5718-000CN Rail  - Cartridge guide rail - Right side toner cartridge guide rail
RG5-5714-000CN Rail  - Left lower rail assembly
RG5-5772-000CN Cable  - Fuser Assembly high voltage cable and connectors
RG5-6237-020CN PC_Board  - Paper volume sensor board
RG5-5704-000CN Latch  - Latch mount assembly
RG5-5709-000CN Mount  - Front pressure mount for toner cartridge
RG5-7786-000CN Cable  - Fan control cable assembly - Includes the cable assembly and holder - Mounts on the rear of the printer and routes cable around the DC controller board
8120-6815 Power_Cord  - Power cord (Flint Gray) - 17 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (for 220V in Switzerland)
RG5-6239-020CN PC_Board  - LED board - Small PC board with two LEDs and a connector - For indicating the operating status
RF5-3403-000CN Roller  - Pick-up roller for optional tray 1
4H1-6580-000CN LED  - User LED PC board - Small status indicator LED board - Mounts in the upper left corner of the front frame on the multifunction finisher assembly
RG5-8038-000CN Cable  - Multi-purpose/tray 1 cable assembly
RB2-5517-000CN Mount  - Front Fuser Assembly mount
RB2-5518-000CN Mount  - Rear Fuser Assembly mount
8120-8707 Power_Cord  - Power cord (Flint Gray) - 17 AWG, 2.3m (7.5ft) long - Has straight (F) C13 receptacle (for 220V in China)
XB4-5401-209CN Screw  - Screw - M4 X 8mm long
RB2-5813-000CN Lever  - Custom/standard media size selection switch lever - Mounts on the left side of the 500-sheet paper input tray
RB2-5607-000CN Cover  - Fan cover - Metal cover for fan #5 - Cartridge fan cover
4G1-5178-000CN Caster  - Stationary extended caster
RF5-3682-000CN Guide  - Rear paper guide - Width adjustable side wall for documents placed in the ADF input tray - Mounts on top of the ADF base assembly
RS6-2492-000CN Spring  - Compression spring - Provides upward pressure on the two delvery roller pairs on left end of the scanner assembly (two used)
RG5-5679-000CN Cable  - Cable assembly
XD9-0134-000CN Clip  - E-ring retainer clip
XD9-0136-000CN Clip  - Retaining E-ring
XA9-0265-000CN Screw  - Screw with captured washer - To hole plastic to metal - M4X6
XA9-1300-000CN Screw  - Screw - M4 X 8mm long
XB6-7300-605CN Screw  - TP Screw - Pan/washer head machine screw - M3X6
XB6-7300-805CN Screw  - TP Screw - Pan/washer head machine screw - M3X8
VD7-0645-001CN Fuse  - Fuse - 5A, 250V - Mounts in the flatbed scanner power supply assembly
RG5-5649-000CN PC_Board  - Delivery assembly PC board
RG5-6239-000CN PC_Board  - LED board - Small PC board with two LEDs and a connector - For indicating the operating status
VD7-0643-151CN Fuse  - Fuse - 3.15A, 250V max
8120-8706 Power_Cord  - Power cord (Flint Gray) - 2.3m (7.5ft) long - Has EPSR symbol molded into the plug and straight (F) receptacle (for 220V in Hong Kong)
XA9-0135-000CN Retainer  - Push nut retainer
RB2-7762-020CN Lever  - Paper size switching lever - To adjust paper size in tray (standard or custom size)
RG5-8021-000CN Cable  - Cable assembly
WC4-5171-000CN Switch  - Fuser delivery drive assembly microswitch
RG5-6272-000CN Cover  - ADF base cover assembly - Bottom half of ADF assembly that sits on top of flatbed scanner
Q5693-60522 PC_Board  - Controller PC board assembly - Includes the controller PC board and metal shield - Mounts on the bottom rear of the 8-bin mailbox assembly
Q3726-60112 Overlay  - Control panel overlay kit - Includes the 'Ready', 'Data', 'Attention' LEDs left side overlay, and the 'Reset', 'Stop', 'Start' buttons right side overlay (Norwegian)
4G1-1483-000CN PC_Board  - DC controller PC board - Controls the timing and functionality of the multifunction finisher - Mounts on the rear frame above the power supply
C2951A Cable  - IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36 pin Centronics (M) connector (type B) - 3.0m (9.8ft) long
C8085-60550 PC_Board  - Stacker/stapler controller PC board - Mounts just above the power supply assembly
C8084-69512 PC_Board  - 3000 sheet stacker controller PC Board
C8568A Tray  - HP LJ9000 series Multipurpose Tray - Tray 1 assembly
C4292A Memory  - 8MB Traditional Chinese MROM DIMM - For LaserJet printers
C8088B Stacker_Assembly  - HP Multifunction Finisher - Has stacking, offset, stapling, booklet making and page by page folding capabilities
8120-6813 Power_Cord  - Power cord (dove gray) - 2.3M (7.5ft) long - Has straight (F) receptacle (For 240VAC in the United Kingdom, Hong Kong, Singapore, Malaysia)
Q2627A Memory  - HP 256MB 100 Pin DDR DIMM - Used to add flash memory-based accessory fonts, macros, and patterns
Q2628A Memory  - HP 512MB 100 Pin DDR DIMM - Used to add flash memory-based accessory fonts, macros, and patterns
Q5693-60503 PC_Board  - Controller PC board assembly - Includes the controller PC board and metal shield - Mounts on the bottom rear of the 8-bin mailbox assembly
RB2-8031-000CN Cover  - Cable cover (Black plastic) - Covers and protects the cables on the front side of the ADF main assembly
Q3701A PC_Board  - HP LaserJet MFP Analog Fax Accessory 300
4H1-6577-020CN LED  - Service LED PC board - Small board with three LEDs - Used for troubleshooting jams and/or failures
RB2-5661-000CN Rod  - ON/OFF switch push rod
RB2-8678-000CN Ferrite_Assembly  - Ferrite core assembly - Large 'doughnut' shaped ferrite for the ribbon cable that connects the scanner control PC board to the ADF analog processor PC board
Q3726-60109 Overlay  - Control panel overlay kit - Includes the 'Ready', 'Data', 'Attention' LEDs left side overlay, and the 'Reset', 'Stop', 'Start' buttons right side overlay (European Spanish)
WC4-5175-000CN Switch  - Micro-switch - Detects when the paper feeder/scanner assembly is open - Mounts in a support bracket on the rear frame of the ADF paper pickup assembly
Q3726-60111 Overlay  - Control panel overlay kit - Includes the 'Ready', 'Data', 'Attention' LEDs left side overlay, and the 'Reset', 'Stop', 'Start' buttons right side overlay (Brazialian Portuguese)
RB2-7970-000CN Static_Dissipater  - Static charge eliminator - Comb that dissipates static charge as paper exits the ADF assembly - Mounts above upper delivery roller in the ADF paper pickup assembly
C4785-60522 Lever  - Face-up full lever flap - Snap locks on the output roller in the flipper assembly - Activates a photo-sensor when the face-up output tray on the 8-bin mailbox assembly is full
8120-6812 Power_Cord  - Power cord (Flint Gray) - 18 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (for 120V in the USA, Canada, Mexico, Philippines, and Taiwan)
RB2-5700-000CN Latch  - Front cover latch - Roller latch that holds front cover
RG5-5735-000CN Cable  - Power supply cable - Connects between the scanner power supply board and the print engine power supply module
RB2-5515-000CN Rail  - Front Fusing Rail
8120-6810 Power_Cord  - Power cord (Flint Gray) - 2.3m (7.5ft) long - Has straight (F) receptacle (For 240V operation in Australia, New Zealand)
RF5-3850-000CN Filter  - ADF optical unit air filter - Keeps dust particles from contacting the scanning lamp - Mounts on the lower rear of the ADF main assembly
4B1-0626-000CN Guide  - Paper guide wire-form - Large 'U' shaped paper guide that locks on the back of the paper flipper assembly
RB2-5516-000CN Rail  - Rear Fusing Rail
Q3726-60106 Overlay  - Control panel overlay kit - Includes the 'Ready', 'Data', 'Attention' LEDs left side overlay, and the 'Reset', 'Stop', 'Start' buttons right side overlay (European French)
RB2-5526-000CN Guide  - Cartridge guide - Plastic structure with cartridge guide slot molded into it - Mounts on the upper front side of the registration assembly
RF5-3698-000CN Guide  - Front paper guide - Width adjustable side wall for documents placed in the ADF input tray - Mounts on top of the ADF base assembly
RG5-5710-000CN Mount  - Rear pressure mount for toner cartridge
RB2-7935-000CN Mount  - Glass mount cover - Small plastic piece that covers the mounting hardware used to retain the copyboard glass - Mounts in the recesses on the scanner assembly upper front cover (two used)
RB2-8060-000CN Cover  - Connector cover - Small rectangular piece that extends out from the back of the scanner assembly (two used)
RB2-7662-000CN Housing  - Jetlink connector housing and cable holder assembly
RG5-7783-000CN Cable  - Fan connecting cable - Mounts on the rear of the printer
RF5-3338-000CN Roller  - Feed separation pick-up roller - Rubber roller on a plastic collar with integrated gear and locking tab
RB2-5640-000CN Shutter  - Laser shutter - Cartridge shutter actuator - Piece that opens cartridge shutter as it is inserted into the printer
RB2-5654-000CN Hinge  - Front cover hinge
RB2-8046-000CN Guide  - Lower front cable guide (I/F 1) - One of six pieces that form the pivioting cable guide from the ADF assembly to the scanner assembly - Mounts on the left rear of the ADF assembly
RB2-5570-020CN Mount  - Door dampener hinge mount - Left side/fuser door dampener mount (two used)
Q3726-60117 Overlay  - Control panel overlay kit - Includes the 'Ready', 'Data', 'Attention' LEDs left side overlay, and the 'Reset', 'Stop', 'Start' buttons right side overlay (Russian)
RB2-6500-000CN Control_Panel  - Left side control panel overlay - Overlay thet mounts next to the control panel overlay (English)
RB2-5607-020CN Cover  - Fan cover - Metal cover for fan #5 - Cartridge fan cover
4G1-5155-000CN Job_Offset  - Front aligner rack - 'L' shaped structure marked with an 'F' - Used to perform the job offset function
8120-6811 Power_Cord  - Power cord (Flint Gray) - 17 AWG, 2.3m (7.5ft) long - Has straight (F) C13 receptacle (for 220V in Europe, Saudi Arabia, South Africa, India, and Korea)
RB1-6421-000CN Foot  - Chassis foot - Support for right side of printer chassis - Two used
RB2-5522-000CN Guide  - Paper pickup guide - Plastic shaft with several fins on it - Mounts on the upper right side of the print engine frame assembly
5090-3379 Cleaner  - Toner cleaning cloth - Specially treated cloth for absorbing toner (1 per package) - Ideal for cleaning up toner spills
4B1-0670-000CN Handle  - Product release handle - Activates the product attachment latch at the top right of the unit
Q3726-60110 Overlay  - Control panel overlay kit - Includes the 'Ready', 'Data', 'Attention' LEDs left side overlay, and the 'Reset', 'Stop', 'Start' buttons right side overlay (Dutch)
Q3726-60108 Overlay  - Control panel overlay kit - Includes the 'Ready', 'Data', 'Attention' LEDs left side overlay, and the 'Reset', 'Stop', 'Start' buttons right side overlay (German)
RG5-5770-000CN Cable  - Cable assembly
4A1-7294-000CN Knob  - Folding knob - Green plastic knob used to clear paper jam in the folding assembly
4H1-6581-000CN Cable  - Low voltage power supply cable - Connects between the power supply and the DC controller PC board
RB2-8002-000CN Flag  - Flag lever - Lever half of the sensor flag for detecting when the ADF input tray is empty - Flag part hangs down at the entrance to the ADF paper pickup assembly
RB2-7927-000CN Clip  - Glass mounting alignment clip - Used to properly align the copyboard glass in the scanner assembly cover frame - Mounts in the left rear corner of the frame (one used)
Q3726-60113 Overlay  - Control panel overlay kit - Includes the 'Ready', 'Data', 'Attention' LEDs left side overlay, and the 'Reset', 'Stop', 'Start' buttons right side overlay (Swedish)
Q3726-60114 Overlay  - Control panel overlay kit - Includes the 'Ready', 'Data', 'Attention' LEDs left side overlay, and the 'Reset', 'Stop', 'Start' buttons right side overlay (Finnish)
Q3726-60124 Overlay  - Control panel overlay kit - Includes the 'Ready', 'Data', 'Attention' LEDs left side overlay, and the 'Reset', 'Stop', 'Start' buttons right side overlay (Turkish)
RB2-5523-000CN Contact  - Fuser electrical contact leaf spring
RB2-8017-000CN Latch  - Release latch - Curved plastic latch that slides on the latching shaft - Secures the ADF main assembly when the unit is in the operating position - Mounts on the front of the ADF main assembly
RB2-7943-000CN Lever  - Sensor lever - Rotating arm with a flag at one end that protrudes through the ADF base and another at the other end that activates one of the media length sensors - Mounts on the bottom center of the ADF base assembly (two used)
RB2-5664-000CN Cover  - Tray 1/MP Tray cable cover
Q3726-60105 Overlay  - Control panel overlay kit - Includes the 'Ready', 'Data', 'Attention' LEDs left side overlay, and the 'Reset', 'Stop', 'Start' buttons right side overlay (English)
RB2-7964-000CN Flag  - ADF open flag - Quarter round plastic flag on a short arm - Activates the photo-sensor when the ADF assembly is open - Mounts on the front frame of the ADF paper pickup assembly
4G1-5178-020CN Caster  - Stationary extended caster
RB2-5697-000CN Cover  - Right front inside corner cover
Q3726-60107 Overlay  - Control panel overlay kit - Includes the 'Ready', 'Data', 'Attention' LEDs left side overlay, and the 'Reset', 'Stop', 'Start' buttons right side overlay (Italian)
VD7-2895-001CN Fuse  - Fuse - 5A, 250 VAC - Mounts in the flatbed scanner power supply assembly
4G1-5156-000CN Job_Offset  - Rear aligner rack - 'L' shaped structure marked with an 'R' - Used to perform the job offset function
RB2-7978-000CN Flag  - Flag lever - Sensor activator half of the sensor flag for detecting when the ADF input tray is empty - Activates the sensor on the rear wall of the ADF paper pickup assembly
RG5-5752-000CN Cable  - Control panel cable assembly - Connects between the control panel and the intermediate PC board
RB2-5652-000CN Hinge  - Cover hinge - Half of hinge that attaches to front cover
4A1-7365-000CN Gear  - Handle mounting gear - Includes the 16 tooth gear and retaining 'E' clip - Manually driven by the green paper jam clearing handle for the fold assembly
Q3726-60116 Control_Panel  - Control panel overlay kit - Includes the 'Ready', 'Data', 'Attention' LEDs left side overlay, and the 'Reset', 'Stop', 'Start' buttons right side overlay (Polish)
Q3726-60125 Overlay  - Control panel overlay kit - Includes the 'Ready', 'Data', 'Attention' LEDs left side overlay, and the 'Reset', 'Stop', 'Start' buttons right side overlay (Hebrew)
Q3726-60126 Overlay  - Control panel overlay kit - Includes the 'Ready', 'Data', 'Attention' LEDs left side overlay, and the 'Reset', 'Stop', 'Start' buttons right side overlay (Greek)
Q3726-60130 Overlay  - Control panel overlay kit - Includes the 'Ready', 'Data', 'Attention' LEDs left side overlay, and the 'Reset', 'Stop', 'Start' buttons right side overlay (Thai)
Q3726-60115 Overlay  - Control panel overlay kit - Includes the 'Ready', 'Data', 'Attention' LEDs left side overlay, and the 'Reset', 'Stop', 'Start' buttons right side overlay (Danish)
Q3726-60118 Overlay  - Control panel overlay kit - Includes the 'Ready', 'Data', 'Attention' LEDs left side overlay, and the 'Reset', 'Stop', 'Start' buttons right side overlay (Czech)
Q3726-60123 Overlay  - Control panel overlay kit - Includes the 'Ready', 'Data', 'Attention' LEDs left side overlay, and the 'Reset', 'Stop', 'Start' buttons right side overlay (Japanese)
Q3726-60127 Overlay  - Control panel overlay kit - Includes the 'Ready', 'Data', 'Attention' LEDs left side overlay, and the 'Reset', 'Stop', 'Start' buttons right side overlay (Arabic)
RF5-3340-000CN Roller  - Paper pick-up and feed roller assembly - Rubber roller with drive gear
RB2-8681-000CN Guide  - Lower internal cable guide (I/F 5) - One of six pieces that form the pivioting cable guide from the ADF assembly to the scanner assembly - Mounts on the left rear of the ADF assembly
RB2-5529-000CN Foot  - Chassis foot - Support for left side of printer chassis - Two used
RB2-7928-000CN Clip  - Glass mounting clip - Used to retain the copyboard glass in the scanner assembly cover frame - Mounts in the left front, right front, and right rear corners of the frame (three used)
RB2-5517-020CN Mount  - Front Fuser Assembly mount
RB2-7999-000CN Weight  - Weight plate (Only) - Black plastic plate that drops down during the paper pickup process and pushes against the paper stack on the pickup rollers - Mounts in the ADF paper pickup assembly
RB2-6537-000CN Hook  - Cover hook - Used to mount the optional tray 1 assembly to the right side of the printer - Mounts on the top corners of the assembly (two used)
RS6-2298-020CN Spring  - Tension spring
RB2-5845-000CN Knob  - Jam removal knob
XB4-5401-009CN Screw  - Machine screw with attached washer - M3, 10mm - Used to hold plastic to metal
RB2-8682-000CN Guide  - Upper internal cable guide (I/F 6) - Arm shaped ribbon cable retainer - One of six pieces that form the pivioting cable guide from the ADF assembly to the scanner assembly - Mounts on the left rear of the ADF assembly
XA9-1495-000CN Screw  - Wafer head machine screw - M3, 6mm long, No. 2 Phillips recess - Secures metal to sheet metal
XA9-1500-000CN Screw  - M3 pan-head Phillips screw with flat washer - 8mm long
XA9-1420-000CN Screw  - M3 pan head phillips screw with captive flat and split-lock washers - 8mm long
RB2-6541-000CN Guide  - Paper guide
RB2-6495-000CN Clip  - Holder clip lock - Secures the ADF/Scanner assembly to the top of printer (four used)
RB2-7939-000CN Arm  - Tray rack arm - Strip of plastic with gear teeth molded into one side - Keeps the front and rear paper guides on the ADF input tray equidistant from the center (two used)
RB2-6035-000CN Flag  - Sensor flag - Long rod with forked flag toward one end and curved flag at the other
RB2-6036-000CN Flag  - Sensor flag - Short rod with two flat flags and a curved end flag
RB2-6037-000CN Flag  - Sensor flag - Short rod with two flags on it
RB2-6077-000CN Lever  - Microswitch lever - Activates interlock switches from both the front and left doors
RB2-8693-000CN Holder  - ADF stop holder - White plastic 'T' shaped bumper that limits travel of the ADF main assembly mechanism - Mounts in the upper left front corner of the lower feed mechanism
RB2-5639-000CN Arm  - Shutter arm
RB2-5531-000CN Cover  - Blanking cover - Located behind the cartridge release lever
RB2-5547-000CN Latch  - Left side alignment latch for front door
RS5-0708-000CN Gear  - 21 tooth gear
RB2-7989-000CN Spacer  - Support spacer - Used to keep the separation belts tight between the drive shaft and the stationary shaft in the separation assembly - Mounts in the ADF paper pickup assembly (three used)
RB2-7990-000CN Holder  - Spring holder - Small Black plastic piece that holds the leaf spring against the stationary shaft in each spacer in the separation assembly - Mounts in the ADF paper pickup assembly (three used)
RB2-8047-000CN Guide  - Upper front cable guide (I/F 4) - Curved plastic piece - One of six pieces that form the pivioting cable guide from the ADF assembly to the scanner assembly - Mounts on the left rear of the ADF assembly
RS6-2285-000CN Spring  - Tension spring
Q3726-60119 Overlay  - Control panel overlay kit - Includes the 'Ready', 'Data', 'Attention' LEDs left side overlay, and the 'Reset', 'Stop', 'Start' buttons right side overlay (Hungarian)
RH2-5445-000CN Cable  - High voltage power supply ribbon cable
RS6-2301-000CN Spring  - Compression spring - provides tension for right cover latch
RS6-2492-020CN Spring  - Compression spring - Provides upward pressure on the two delvery roller pairs on left end of the scanner assembly (two used)
RS6-2496-000CN Spring  - Tension spring - Attaches between the delivery motor mount and the ADF paper pickup assembly rear frame - Provides tension for ADF delivery motor belt
RS6-2503-000CN Spring  - Tension spring - Keeps the ADF main assembly latched in the operating position on the paper pickup assembly - One mounts on each release latch on the ADF main assembly (two used)
RB2-5816-000CN Spring  - Torsion spring - Provides tension for paper selector switch
RB2-6042-000CN Spring  - Torsion spring - Provides tension for bin full flag
RS6-2299-000CN Spring  - Shutter arm spring - Provides tension for shutter arm
RS6-2302-000CN Spring  - Compression spring - Provides tension for ON/OFF switch
RS6-2498-000CN Spring  - Tension spring - Attaches between the weight solenoid assembly arm and the rear frame of the ADF paper pickup assembly - Provides tension for lifting the weight assembly
RB2-5655-000CN Clip  - Retaining clip
XB6-7303-005CN Screw  - Machine screw - M3, 30mm long with self-tapping threads - Typically used to hold metal to plastic
XA9-1466-000CN Screw  - Machine screw with captured washer - M3 X 29.5mm long
XB2-6300-607CN Screw  - Screw - M3 X 6mm long
XA9-1273-000CN Screw  - M4 X 12mm Indented pan head screw
RS5-9099-000CN Screw  - Stepped screw - Larger shoulder screw used to fasten the left side cover to the frame of the 2,000-sheet paper feeder assembly (two used)
XA9-1276-000CN Screw  - Wafer head machine screw, clear zinc, 3M X 8mm - Secures plastic to metal
XA9-0668-000CN Screw  - Machine screw with captured washer - M3 X 29.5mm long
XA9-0912-000CN Screw  - Machine screw with captured washer - M5 X 12 - Typically used to secure plastic parts to metal
XA9-0994-000CN Screw  - Screw - M4 x 6mm long
XA9-1448-000CN Screw  - Screw - M4 X 8mm long
XA9-1469-000CN Hardware  - Machine screw with attached washer - M3, 10mm - Used to hold plastic to metal
RB2-5518-020CN Mount  - Rear Fuser Assembly mount
XD2-1100-322CN Clip  - E-ring retainer clip
RS6-2296-000CN Spring  - Laser shutter spring - Provides tension for laser shutter
RB2-7991-000CN Spring  - Leaf spring - Used to lock the spacer between the drive shaft and the stationary shaft in the separation assembly - Mounts in the ADF paper pickup assembly (three used)
XD9-0233-000CN Clip  - Retaining E-ring
VD5-0246-301CN Fuse  - Low voltage power supply fuse - 110V
RG5-5736-000CN Cable  - Grounding cable - Grounding cable for ADF/scanner assembly
RG5-6249-000CN Cable  - Jetlink connector grounding cable
RG5-5645-000CN Delivery  - Delivery cross member assembly - Includes the 'L' shaped support bracket with the rear delivery fan (Fan 3), front delivery fan (Fan 4), and face down tray fan (Fan 6)
5851-1468 Other_Parts  - GD: LJ PAPER SPEC
VD7-3503-151CN Fuse  - Fuse - 3.15A, 250V max
5851-1468 Other_Parts  - GD: LJ PAPER SPEC
Q6541A Paper  - HP Color Laser Soft-gloss Presentation Paper - A size (8.5 x 11-inches) - 200 sheets
4G1-5166-120CN Mechanism  - Paper folding mechanism - Perfoms booklet paper folding function
Q2419A Paper  - High gloss LaserJet paper - High gloss finish on both sides, 95 brightness - A size (8.5 x 11-inches) - 200 sheets per box
Q2420A Paper  - High Gloss Laser Paper - B size (11 x 17-inches) - 200 sheets
Q3721-90934 Manual  - LJ 9000/9050 series combined service manual. go to home page SUPPORT CENTER.
Q3726-67907 PC_Board  - Formatter PC board assembly - For the LaserJet 9040MFP and 9050MFP versions
Q2625AX Memory  - 64MB DDR DIMM
J3258G Print_Server  - HP JetDirect 170X external print server module (10Base-T) - Connects between printer parallel port and LAN network
UT813PE Care_Pack  - HP 2 year Post-Warranty Next business day onsite LaserJet 9xx M90xx MFP Hardware Support
UU927PE Care_Pack  - HP 1 year Post Warranty Phone Assist High-end Multifunction LaserJet printer Service
XA9-1189-000CN Screw  - Machine screw with attached washer - M3, 10mm - Used to hold plastic to metal
XA9-1200-000CN Screw  - M3 X 8 Screw
XA9-0596-000CN Screw  - M3 X 6 screw
XA9-1275-000CN Screw  - Wafer head machine screw - M3, 6mm long, No. 2 Phillips recess - Secures metal to sheet metal
J3263G Print_Server  - HP JetDirect 300X external print server module (10Base-T and 100Base-TX) - Connects between printer parallel port and LAN network
J3265G Print_Server  - HP JetDirect 500X external token ring print server module - Interfaces up to 3 parallel printers to an ethernet 10Base-T (RJ-45), 10Base2 (BNC), or 100Base-TX (RJ-45) LAN
0515-4318 Screw  - Stabilizing screw for the 2,000-sheet feeder - Mounts on right side of the 2,000-sheet paper feeder assembly (two used)
Q1298A Paper  - LaserJet Satin finish tough paper - A size (8.5 x 11-inches) - Will not tear and will withstand outdoor weather conditions - Can print on both sides
Q1298B Paper  - LaserJet Satin finish tough paper - A4 size (21.0cm x 29.7cm) - Will not tear and will withstand outdoor weather conditions - Can print on both sides - 50 sheets per box
Q2413A Paper  - Premium LaserJet cover paper - Heavyweight (75lb), smooth finish on both sides, 96 brightness - A size (8.5 x 11-inches) - 100 sheets per box
C8568-69002 Tray  - Optional Tray 1 assembly - Complete Tray 1 assembly including rollers and mechanical drives
C8531-67908 Tray  - Tray 4 assembly (complete) - 2,000-sheet high capacity paper feeder assembly
UL424PE Care_Pack  - HP 1 year Post Warranty Next business day Onsite Defective media retention LJ9050MFP Support
RH7-1481-000CN Motor  - Deck drive motor (M303) only - Mounts in the 2,000-sheet paper feeder assembly
H7700E Care_Pack  - HP 3 year Next business day Onsite LaserJet 9040/9050MFP and M9040/M9050MFPHardware Support
U2014E Care_Pack  - HP Network Install high-end LaserJet Multifunction printer Service
U2019E Care_Pack  - HP 3 year 4 hour response 13x5 Onsite LaserJet 9040/9050 and M9040/M9050MFP Hardware Support
U2020PE Care_Pack  - HP 1 year Post Warranty Next business day Onsite LaserJet 9040/9050 and M9040/9050MFP HW Support
U2052PE Care_Pack  - HP 1 year Post Warranty 4 hour response 13x5 Onsite LaserJet90xxMFP and M9040/M9050MFP HW Support
U4928E Care_Pack  - HP 3 year 4 hour response 9x5 Onsite LaserJet 9040/9050 and M9040/M9050MFP Hardware Support
U4932PE Care_Pack  - HP 1 year Post Warranty 4 hour response 9x5 Onsite Designjet 5500 60-inch Hardware Support
U6402PE Care_Pack  - HP 1 year PW 4 hour response 9x5 Onsite LaserJet 9040/9050MFP and M9040/M9050MFP Hardware Support
U9877E Care_Pack  - HP Maintenance Kit Replacement LaserJet 90xx/90xxMFP/M90xxMFP Fuser 110V Service
Q7719AX Memory  - 256MB DDR DIMM
Q3726A-Manual Service_Guide_PH  - HP LaserJet 9040MFP Printer Service Manual - Includes troubleshooting, error messages, paper jams, parts and parts diagrams.
VD7-9825-000CN Fuse  - Fuse - 5A, 250 VAC - Mounts in the flatbed scanner power supply assembly
RG5-5723-000CN Cable  - Upper cable guide assembly
8120-6800 Power_Cord  - Power cord (Flint Gray) - 16 AWG, 2.3m (7.5ft) long - Has straight (F) C13 receptacle (for 240V in Israel)

Fuser Fusing Assembly Heater Assembly HP Fuser Kits Printer Fuser Unit HP Repair Kit HP Transfer Kit